Design and Function. Caso FW 2000 Mincer, FW2000, Fleischwolf FW2000, 2870

•

Make sure that the power cable is undamaged and has not been installed under the ice maker or over hot or sharp surfaces.

•

The electrical outlet must be protected by a 16A safety cut-out switch.

•

The electrical safety of the device is only guaranteed if the device is connected to a properly installed protective conductor system. If in doubt, have the house installation checked over by a qualified electrician.

The manufacturer cannot be made responsible for damages that are caused by a missing or damaged protective conductor.

16

Design and Function

In this chapter, you'll find important information on the design and function of the device.

16.1 Overview

1 motor unit

2 switch (REV,

OFF, 1, 2)

3 locking handle

4 tube inlet

5 pusher

6 hopper plate

7 head tube

8 snake

9 blade

10 cutting plate medium (5mm) 11 cutting plate coarse (8 mm) 15 cutting plate fine (3 mm)

12 fixing ring 13 sausage accessory 14 dough accessory with pattern

30