Do Not Disturb (DND). Vertical SBX IP 320

Call Handling 40

To activate a speed dial with security dialing:

Press the [SPEED] button + dial the Speed dial bin number which was programmed with dialing security.

•

•

Conditions

• Dialed phone numbers with Dialing Security are included in SMDR information.

This feature applies to transferred or recalled CO calls.

This feature applies to redial calls.

Do Not Disturb (DND)

Placing a station in DND eliminates incoming outside line ringing, intercom calls, transfers, and paging announcements. While in DND, the station will not receive calls on CO lines. The

Attendant can override a station in DND. Stations in DND can continue to make normal outgoing calls. Station users can individually have the ability to place their station in DND

(PGM 114). By default, DND is available at all stations.

Operation

To activate DND from a DKTU:

Press the [DND/FWD] button.

To deactivate DND from a DKTU:

Press the [DND/FWD] button again.

•

•

Conditions

• Pressing the [DND/FWD] button during call forward or while a pre-selected message is active, will not activate DND; call forward or the pre-selected message will be released.

• When a Station assigned to preset call forward is in DND mode, and an incoming call is received at the next station by ring assignment.

An Attendant can override a station which is in DND by using Camp-on or Intrusion.

An Attendant may cancel DND for one or all stations.

Admin Programming

• Do-Not-Disturb (PGM 111)

SBX IP 320 Features & Operation Guide