Outgoing Call Access 155

•

•

•

•

• The station attributes of the second station (Slave) will follow the attributes of the

Master's. (Ex. Day/Night COS, CO Warning Tone, CO Auto Hold, CO Call Drop, Alarm)

The Doorbox, DSS/BLF, or ISDN phone cannot be linked with a station.

Linked station pairs are operated in Tone mode regardless of intercom Answer mode

(STA program 12).

The Attendant station cannot be linked with another station.

A linked station can call his pair station by dialing their own number. It is possible to make CO line/Intercom Transfer between two pairs.

A Port blocked station cannot be linked with any other station.

•

Admin Programming

• Linked Station Pairs (PGM 179)

Outgoing Call Access

Basic Access

Each station is allowed or denied access based on particular CO Lines or CO Groups. Station users may use Flexible buttons which are assigned as a {CO} button or {CO Group} button, including the {POOL} and {LOOP} buttons. According to the Numbering Plan, station users can access individual CO Lines by dialing CO Access Codes.

FEATURE DESCRIPTION OPERATION METHOD ACCESS CODE

Idle Line Access (88 +

CO Line number)

Automatically selects an idle CO Line from the assigned CO Groups

CO Group Access

(8 + CO Group number)

Selects an idle CO Line from the corresponding

CO Group.

Dial the idle Line Access

Number (9), or press a CO

Line button.

8801-8816

Dial the CO Group Access number and a CO Group number, or press a CO

Group button.

801-808

You can dial 9 to access the first idle line in their CO group.

You can dial 8801 to access CO Line 001 if it is idle.

You can dial 801 to access the first idle CO Line in CO Group 1.

SBX IP 320 Features & Operation Guide

Outgoing Call Access 156

Operation

To access a CO Line from a DKTU:

1.

Lift the handset or press the [SPEAKER] button.

2.

Press the desired CO Line, {POOL} button, or {LOOP} button.

-or-

Dial the individual CO Line Access Code, CO Group Access Code, or the first CO Line

Access Code from the accessible group.

To access a CO Line from an SLT:

1.

Lift the handset.

2.

Dial the individual CO Line, CO Group Access Code, or the first CO Line Access Code from the accessible group.

To access a CO Line Group:

1.

Lift the handset.

2.

Press 8 for the CO Group.

3.

Dial the CO Group number.

To assign the {LOOP} button:

1.

Press the [TRANS/PGM] button.

2.

Press {FLEX}.

3.

Press [TRANS/PGM].

4.

Dial 84.

5.

Press the [HOLD/SAVE] button to accept changes.

SBX IP 320 Features & Operation Guide

Outgoing Call Access 157

Conditions

• A DKTU should have an idle appearance (CO Line/Pool button/Loop button) to access an incoming/outgoing CO Line.

• When the Override 1st CO Line Group is enabled, the System will search for the next accessible CO group until a CO Line is available, if there is no available CO Line by dialing the CO Line group access code (9 or 0).

•

•

•

•

•

An error tone sounds when a Station is not permitted to access a CO Line, but the Station will still be able to receive a transferred CO Line call as applicable.

The CO Line choice (Round-robin or Last Choice) is determined by Admin

Programming (PGM 160 - FLEX 3)

If the CO Line is BRI, when a user tries to secure B1 the System can change the CO Line to B2 (if there is a {B2 CO} button or {LOOP} button).

Unused CO Lines should be assigned to unused CO Group 9 to prevent being accessed by a station.

The first CO Line group (00) is the directed line group and can be used with the {CO

Line} button (Private Line).

•

•

•

•

Admin Programming

• CO Line Choice (PGM 160 - FLEX 3)

Inter-digit Timer (PGM 181 - FLEX 8)

CO Line Group Access (PGM 117)

CO Line Group (PGM 141 - FLEX 1)

Override 1st CO Line Group (PGM 161 - FLEX 3)

SBX IP 320 Features & Operation Guide