On-Hook Dialing. Vertical SBX IP 320

Call Handling

On-Hook Dialing

A station can make a call without lifting the handset by using the speakerphone or monitor mode.

If this feature does not operate, verify if the speakerphone is enabled or disabled. On-hook dialing is not available on all keysets.

Operation

To use On-hook dialing, use the following procedure:

1.

Verify that the Auto Speaker Selection is ON.

2.

Assign a CO line/Intercom/Speed Dial to a flexible button.

3.

Press the flexible button.

-or-

1.

Verify the Auto Speaker Selection OFF.

2.

Assign a CO line/Intercom/Speed Dial to a flexible button.

3.

Press the flexible button. LIFT HANDSET will display on the LCD.

4.

Lift handset or press the [SPEAKER] button to operate.

Admin Programming

• Auto Speaker Selection (PGM 111 - FLEX 1)

70

SBX IP 320 Features & Operation Guide