advertisement
V4
CONNECTION DIAGRAM
D8 MAIN BOARD
TELEPHONE
AUX1
AUX2
ARM1
ARM2
12V
0V
J2 CONNECTOR
NESS RADIO INTERFACE
(Optional)
J1 LINK
BOX TAMPER & PROGRAM LINK
= Sealed, normal state
= Tamper alarm state
Power up with link off to enter installer program mode
BOX TAMPER LEADS
(supplied)
J3 HEADER
Provides Open Collector outputs as marked.
BOX TAMPER SWITCH
N.C. Contacts (WHITE)
(supplied)
“HEARTBEAT”LED
Constantly flashes
BATTERY LEADS
(supplied)
SIREN
AC
17V
AC
EARTH
C
Z3
Z2
C
Z1
0V
+12V
DAT
CLK
COM
TAMP
0V
+12V
Z8
C
Z7
Z6
C
Z5
Z4
+12V
RESET
STR
TELEPHONE LEAD (Supplied)
Connect to Mode3 socket
N.O TAMPER SWITCH
(761-002) Colour: BLACK
Supplied with Ness siren covers
2K2
ALTERNATIVE TAMPER SWITCH WIRING
For N.C. Tamper Switches
N.C TAMPER SWITCH (SWI920) Colour: WHITE
2K2
Zone 8
Zone 7
Zone 6
Zone 5
Zone 4
Zone 3
Zone 2
Zone 1
12V DC Power for detectors, etc
Zone
C
Zone
C
ZONE CONNECTION
2K2
2K2
(
NORMALLY CLOSED
( N.C.) DEVICES
NORMALLY OPEN
N.O.) DEVICES
17V AC (Red & Black)
EARTH (White)
12V DC Power for detectors, etc
NESS LED Keypad
(100-192)
DAT
CLK
COM
+12V
Up to 2 x Ness 12V Siren (100-172)
OR 3 x Top Hat Screamer (100-238)
Up to 2 x Strobe Light (NOI-300)
Up to 3 x Horn Speaker, 8 Ohm (NOI-110)
NESS LCD Keypad
(100-667)
Maximum
3 keypads
Ness 17V AC Plug Pack (840-029)
(Australia only)
BATTERY CONNECTION
Connect 12V 7Ah backup battery
HEATSINK
NORMALLY OPEN
Tamper Switch
Part No: 761-002
Colour: Black
TAMPER SWITCH IDENTIFICATION
NORMALLY CLOSED
Tamper Switch
Part No: SWI920
Colour: White
6
The NORMALLY OPEN Tamper Switch is readily identified being black in colour.
This tamper switch is now being to supplied as standard with all Ness siren covers.
The Normally Open contacts are less prone to flase activation in harsh climates.
The standard white NORMALLY CLOSED
Tamper Switch is supplied with all Ness control panels for box tamper.
NESS D8 (V4.5) CONTROL PANEL – INSTALLER MANUAL
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Introduction
- 4 Features
- 4 Specifications
- 5 Packing list
- 5 Installation procedures
- 6 CONNECTION DIAGRAM
- 7 Wiring examples
- 10 Keypad
- 11 OPERATION SUMMARY
- 12 Quick start Programming
- 13 How to enter Program Mode
- 13 Program mode levels
- 14 USER CODES
- 15 Timers
- 16 Vibration Sensitivity
- 19 Zone Assignment
- 21 AREA PARTITIONING
- 23 Zone To Output Mapping
- 25 Various Options
- 26 Tamper/Keypad Panic Output Mapping
- 27 System Operation Shortcuts
- 28 MONITOR MODE OUTPUT MAPPING
- 28 Day mode output mapping
- 29 Miscellaneous Options
- 31 SUPERVISED RADIO ZONES
- 31 Supervision time
- 33 Radio Supervision Alerts
- 35 Misc. options
- 38 Telephone Numbers
- 38 Account Number
- 39 Telephone Number 3 – Test Calls
- 39 Telephone Number 4 – Callback
- 39 Follow me Telephone Number
- 40 Report zone alarms
- 40 Report zone restorals
- 40 Report multiple zone alarms
- 40 Account No.2 zones
- 41 Report Miscellaneous alarms
- 41 Report Miscellaneous Restorals
- 41 Restoral Reporting options
- 42 Test Call Interval
- 42 Time before Next test call
- 42 Dialling Method
- 43 Disable Dialler
- 43 Contact ID format
- 43 Audible DTMF format
- 43 Audible Pulse format
- 44 Contact ID Reporting Codes
- 45 Alternate Dialling
- 45 Check for dial tone
- 45 Number of Dialling Attempts
- 46 Area1 open/close reports
- 46 Area2 open/close reports
- 46 Siren Chirp on kiss-off
- 46 Strobe Flash on kiss-off
- 47 Forced Opening Report
- 47 Delay Closing Report
- 47 Manual Exclude Report
- 47 Auto Exclude Report
- 48 Enable Test Calls
- 48 Mains Report Delay
- 48 Listen-in to dialler
- 49 Swinger Shutdown
- 49 Line Fault Monitor
- 49 Line Fault to AUX
- 50 Remote access
- 50 Direct Connect
- 51 Remote access options
- 52 Required Rings
- 53 Clear Radio Devices
- 53 Clear Memory
- 53 Clear Panel Options
- 53 Clear User Codes
- 54 Radio Quick Start
- 54 Ness Radio Interface
- 54 Signal strength meter
- 55 Radio Devices, Operation
- 55 Radio Supervision, Defined
- 56 Radio Device Programming
- 57 Radio Key Programming
- 58 Audible Monitoring Operation
- 59 Remote Operation by Telephone
- 60 Ness Accessories
- 61 Wireless Products
- 62 PROGRAMMING OPTIONS SUMMARY
- 63 Installation Record