Outbound IP Throttling (LAN to WAN). Billion Electric QI3BIL-7401VGPR4

Destination IP Address Range : The destination IP address or range of packets to be monitored.

Destination Port : The destination port of packets to be monitored.

DSCP Marking : Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte.

DSCP Marking allows users to assign specific application traffic to be executed in priority by the next Router based on the DSCP value. See Table 4 for DSCP Mapping Table .

Note: To be sure the router(s) in the backbones network have the capability in executing and checking the DSCP through-out the QoS network.

Table 4: DSCP Mapping Table

(Wireless) ADSL Router

Disabled

Best Effort

Premium

Gold service (L)

Gold service (M)

Gold service (H)

DSCP Mapping Table

Standard DSCP

None

Best Effort (000000)

Express Forwarding (101110)

Class 1, Gold (001010)

Class 1, Silver (001100)

Class 1, Bronze (001110)

Silver service (L)

Silver service (M)

Silver service (H)

Bronze service (L)

Bronze service (M)

Bronze service (H)

Class 2, Gold (010010)

Class 2, Silver (010100)

Class 2, Bronze (010110)

Class 3, Gold (011010)

Class 3, Silver (011100)

Class 3, Bronze (011110)

Outbound IP Throttling (LAN to WAN)

IP Throttling allows you to limit the speed of IP traffic. The value entered will limit the speed of the application that you set to the specified value’s multiple of 32kbps.

Name : User-define description to identify this new policy/name.

Time Schedule : Scheduling your prioritization policy. Refer to Time Schedule for more information .

102

Protocol : The name of supported protocol.

Rate Limit : To limit the speed of outbound traffic

Source IP Address Range : The source IP address or range of packets to be monitored.

Source Port(s) : The source port of packets to be monitored.

Destination IP Address Range : The destination IP address or range of packets to be monitored.

Destination Port(s) : The destination port of packets to be monitored.

103