IGonamic
CONVERSION KIT INSTRUCTION MANUAL
FOR TRACK AND FIELD P.C.B.'s ONLY
IGonami © is a registered
Konami Inc. trademark of Konami Industry Co., Ltd.
1555 BRUMMEL AVENUE, ELK GROVE VILLAGE, IL 60007 IL MZ" is a registered
TELEPHONE: (312) 364-6633 FAX: (312) 364-1368 TELEX: 6871385 KONAM UW trademark of Konami Inc. © 1985 Konami Inc.
Konami Inc. IGonamic
Ben Har-El
President
Dear Operator:
There are 1.5 Million CHILDREN REPORTED MISSING each year in America.
Some of these children are players in our Arcades.
We at Konami feel that it is our responsibility to participate in combating
this Real and Growing problem. Won't You Help Us Find The Children?
Konami is working in cooperation with CHILD FIND, INC., a not-for-profit
corporation organized to aid parents, legal authorities and the F.B.I.
in the finding of missing children. In an effort to do so, we have
attached to our kits and video games, a poster and a decal showing photos
of children that are listed with Child Find as missing.
Because of the tremendous exposure your gameroom or location can provide,
we ask that you PROMINENTLY DISPIAY the posters and place the decals on
each of the Konami games. We, and the parents of these children are very
greatful for any help that you give us in assisting this extremely important
program.
If it is possible for you to assist Child Find further by sending a tax
deductible donation or if you would like to volunteer any time or services,
please contact Child Find at:
CHIID FIND, INC.
P. O. BOX 277
New Paltz, NY 12561
Phone: (914) 255-1848
Again, thank you very mich for helping us to help find the children. We
deeply appreciate your concern and cooperation.
Best regards,
KONAMI INC.
Ben Har-El
President
PLEASE DON'T FORGET TO DISPLAY THE POSTERS AND DECALS!
1555 BRUMMEL
ELK GROVE VILLAGE, ILLINOIS 60007
PHONE: (312) 364-6633 TELEX: 6871385 KONAM UW FAX: (312) 364-1368
TABLE OF CONTENTS
Page Page
Conversion Kit Contents................. 1 Control Panel Layout............. Lau» 5
Cabinet Preparation. .................... 3 PCB.Diagrams........................ 6
Hardware Instructions... ................ 3 Technical Information. .................. 7
Maximize Yourlncome................... 4 Dip Switch Setting... .................... 8
WiringDiagram ........................ 5 User Information Warning. ....... Back Cover
CONVERSION KIT CONTENTS:
ONE C.P.U. MODULE
ONE QUESTION MODULE
ONE 6809 ADAPTER P.C.B.
SIX WIZZ QUIZ EPROMS
ONE PACKAGE (Spacers, Nuts, Bolts)
TEN SETS — BUTTON ASSEMBLIES
ONE PRE-CUT WIZZ QUIZ MARQUEE (For Track & Field Cabinet)
ONE SET SIDE PANEL GRAPHICS
CONTROL PANEL OVERLAY
FCC WARNING LABEL
MANUAL
REPLACEMENT ACCESSORIES ARE AVAILABLE THROUGH YOUR DISTRIBUTOR.
THIS KIT USABLE FOR TRACK & FIELD P.C.B. ONLY.
IF YOU WISH TO INSTALL YOUR WIZZ QUIZ CONVERTED TRACK AND FIELD P.C.B. INTO A
NON-TRACK & FIELD CABINET, CONTACT YOUR DISTRIBUTOR FOR WIRING HARNESS & DIAGRAM.
WIZZ QUIZ CABINET PREPARATION
[E
WIZZ QUIZ CABINET PREPARATION
1.
2.
*This is the only change to be made on the sound board.
Remove the TRACK & FIELD P.C.B., marquee, and
the control panel from the cabinet.
Replace the marquee with the WIZZ QUIZ custom
cut marquee.
For best results, old side decals should be removed
completely from the cabinet. “Stick-on” graphics
can be removed by using a hairdryer or hot air
device. The heat from the dryer will loosen the
adhesive, allowing you to easily peel them off — any
adhesive residue can be cleaned off with acetone
and a soft dry cloth. (DO NOT USE ACETONE ON
SURFACES PAINTED WITH FLAT PAINT.)
TO APPLY SIDE PANEL DECALS
A. Spray area of cabinet where Side Panel decals
are to be applied with foaming aerosol or a mild
soap solution.
B. Remove protective backing from decals.
C. Position decals into place.
D. With a soft squeegee, beginning from the center
of the decal, slowly and evenly press out excess
foam until you achieve a smooth finish.
E. Allow to set approximately 2 to 3 hours before
handling. Maximum adherence is achieved in 48
to 72 hours.
F. Trim side decal to fit your cabinet.
Remove the ten buttons from the control panel. The
control panel wire harness should be left intact
because it will be used on the WIZZ QUIZ.
Remove the old TRACK & FIELD control panel
overlay. (A heat gun is helpful with this process.)
Next: apply Wizz Quiz control panel overlay, it is
very important that the printing on the overlay line
up with the button holes. When properly applied the
“A, B, á C” letters should be % inch above their
respective holes.
* For wiring diagram see page 5.
HARDWARE INSTRUCTIONS
Disassemble TRACK & FIELD P.C.B.’s by removing screws and spacers, disconnect ribbon cable and power lead.
1. Remove the sound eprom from location 2C of the sound board. (PWB ‘B’) See Fig. 1.
2. Insert WIZZ QUIZ sound eprom (labeled 2C) into that socket. Double check for the correct polarity.
x * * % x CPU/VIDEO P.C.B.
x X Xx XX x
IMPORTANT: Konami released two versions of the CPU/VIDEO P.C.B. (PWB A).
Version 1 used a 42 pin Konami 1 CPU — See Fig. 2. Version 2 used a 40 pin 68B09 CPU — See Fig. 3.
x Yr Kk x * Хх x * Kk x *
CPU BOARD—PWB A
с
VERSION #1 Konami 1 Custom (See Fig. 2)
Remove all eproms from the CPU P.C.B. locations.
A1, A2, АЗ, A4, A5, C11, C12, C14, C15, H14, H15,
and H16.
Insert WIZZ QUIZ eproms labeled C11 and C14 into
locations C11 and C14.
Insert WIZZ QUIZ eproms labeled H14, H15 & H16
into locations H14, H15, & H16.
Locations A1, A2, A3, A4, A5, C12 and C15 will re-
main empty.
Remove the Konami 1 CPU from location C/D3.
Insert WIZZ QUIZ CPU module in location C/D3 pins
1-20 and 23-42. Note: Since the Konami 1 socket is
42 pins and the CPU module is 40 pins, pins 21 and
22 in the socket are not used. (When inserted cor-
rectly, the CPU module will extend over C11. See
Fig. 4.)
Add the Question module PCB (the eight eprom
PCB) to the CPU module.
VERSION #2 6809 Version (See Fig. 3)
Remove all eproms from the CPU P.C.B locations
A2, A4, A5, A6, A7, A17, A19, A20, A21, K2, K4, & K5.
Insert WIZZ QUIZ eprom C11 into location A20 and
C14 into location A17.
Insert WIZZ QUIZ eprom H14 to K5; H15 to K4; and
H16 to K2.
Locations A2, A4, A5, A6, A7, A19, and A21 will re-
main empty.
Remove the 6809 CPU from location C/D6.
Remove the extender socket from the CPU module
and replace it with sub-board (B). Ensure the correct
polarity.
Insert the CPU module with the sub-board into loca-
tion C/D6. When inserted correctly, the CPU module
will extend over IC’s in locations D8-16. See Fig. 4.
Add the Question module PCB (the eight eprom
PCB) to the CPU module.
Install bolts, nuts and spacers provided to support the sound board above the CPU module to ensure no possible
electronic shorts.
Mount the newly converted WIZZ QUIZ P.C.B.’s into the TRACK & FIELD cabinet and connect the 36 pin edge connec-
tor (ensure the correct polarity).
READ THESE IMPORTANT INSTRUCTIONS
TO MAXIMIZE YOUR WiZzZ QUIZ INCOME
On all Konami TRACK & FIELD boards there is a service in-
put on Pin 7 of the edge connector (components side) which
allows the display of the bookkeeping functions.
There is a switch usually connected to this input on original
machines. On converted machines it will be necessary to fit a
switch to the above mentioned Pin 7 in order to access the book-
keeping functions. Depressing this switch quickly will give credit
without affecting meters.
To access the bookkeeping functions, depress the service
switch for 5 seconds. This will display bookkeeping data in the
form of 15 meters. Each meter can count up to 999999, and each
meter function is shown as short term and long term (S-Term;
L-Term on screen). The short term meters may be re-set as and
when required, by depressing button A (on the play control panel
on the front of the machine) for 5 seconds. The long term meters
are not re-settable.
The high scores may be cleared by depressing button B (on
the play control panel) for 5 seconds.
Pressing button C on the play control panel for 5 seconds
clears the screen and returns WIZZ QUIZ ready for normal play.
Please note, when pressing buttons A, B, and C, the required
action will not take place, unless these buttons are depressed for
the full 5 seconds.
QUESTONS AND ANSWERS
There are up to 6000 questions and 18,000 possible answers
stored in the memory of WIZZ QUIZ.
All the questions and answers have been obtained from
authoritative sources, and while every effort has been made to
verify the answers, Konami, Inc., cannot accept any responsibility
for incorrect answers or consequences arising therefrom.
WIZZ QUIZ CONTROL PANEL
CERES LT; —Ú].z—]]—————;]»eI—]]]
WIZZ QUIZ WIRING USING
TRACK & FIELD WIRING HARNESS
CONTROL PANEL LAYOUT
BLACK GROUND oo
еее ] RED SLELCT
ee <
YELLOW SET
... OLET 1 PLAYER 'B
\/| в 1
eo —]
BROWN 1 PLAYER ‘A’
YELLOW 1 PLAYER ‘C’ <
GREEN 2 PLAYER ‘B’ <
BLUE 2 PLAYER ‘A’ <
ORANGE 2 PLAYER °С’
GRAY 2 PLAYER START <
WHITE 1 PLAYER START —
О
В
O
OO O0 O
1 PLAYER 2 SET
О
SELECT
B
Ö 76
IGonamio
WIZZ QUIZ — TRACK & FIELD P.C.B. DIAGRAMS
Fig. 1
GX361 PWB (B) a
SOUND P.C.B. There are two versions of Konami
TRACK & FIELD VIDEO P.C.B.’s. (See
Figs. 2 & 3.) Identify the version you are
converting and refer to instructions of
O that version.
oN
| 9
Le
Fig. 3
Fig. 2 / 16H
GX361 PWB (A) 15H
14H
*68B09 o EMPTY
*Konami 1 ° 40 Pin CPU
42 Pin CPU MP Ya
VIDEO P.C.B. (Version 1) VIDEO P.C.B. (Version 2)
14H
15H
16H сустом®
Fig. 4
Version 1 & Version 2
GX361 PWB (A)
WIZZ QUIZ TECHNICAL INFO:
“NOTE: ORIGINAL TRACK & FIELD POWER SUPPLY IS ACCEPTABLE.
(1) Required Power Capacity
+5V DC 7A or more.
+12V DC See Figure 1 below
Figure 1: 8Q ew 8QEW 8QEW 482 12W JW 49
SPEAKER y DELAI
Required
Power 12V 1A 12V 2A 12V 2A Not Applicable
Capacity
(2) Signal output —
R(red) analog, positive
G(green) analog, positive -
B(blue) analog, positive —
Sync. H-V composite negative UV VU ULIU
A A
H \
OPTIONAL DIP SWITCH SETTINGS
Dip Switch No. 1
CREDITS COIN INPUT #1 COIN INPUT #2
COIN PLAYS | SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
1 1 Off Off Off Off Off Off Off Off
1 2 On Off Off Off On Off Off Off
1 3 Off On Off Off Off On Off Off
1 4 On On Off Off On On Off Off
1 5 Off Off On Off Off Off On Off
1 6 On Off On Off On Off On Off
1 7 Off On On Off Off On On Off
2 1 On On On Off On On On Off
2 3 Off Off Off On Off Off Off On
2 5 On Off Off On On Off Off On
3 1 Off On Off On Off On Off On
3 2 On On Off On On On Off On
3 4 Off Off On On Off Off On On
4 1 On Off On On On Off On On
4 3 Off On On On Off On On On
Free Play On On On On On On On On
2. Dip Switch No. 2
START OF GAME BONUS POINTS AWARDED
NUMBER OF HATS SW1 SW2 BONUS POINTS SW3
3 Hats Off Off
4 Hats On Off 8000 On
5 Hats Off On 10000 Off
6 Hats On On
Switches 4, 5, & 6 are not used
CORRECT ANSWER SW7 CREDIT LIMIT SW8
Shown On 9 On
Not Shown Off 90 Off
USER INFORMATION
WARNING
F.C.C. REGULATION COMPLIANCE
THIS KIT ISINTENDED FOR USE ONLY ON F.C.C. APPROVED
TRACK & FIELD VIDEO GAMES WHICH HAVE BEEN
VERIFIED FOR COMPLIANCE WITH REQUIREMENTS IN
PART 15 OF F.C.C. RULES FOR A CLASS A COMPUTING
DEVICE.
THE P.C. BOARD CAGE USED IN THE TRACK & FIELD
UPRIGHT MUST BE CUSTOMIZED SO THAT IT MAY BE
UTILIZED AND TERMINATED TO GROUND AT THE TIME OF
INSTALLATION.
IMPROPER CONNECTION OF THIS KIT OR CONNECTION TO
ANY OTHER GAME NOT SO MANUFACTURED OR VERIFIED
FOR COMPLIANCE MAY CAUSE UNACCEPTABLE INTER-
FERENCE TO RADIO AND T.V. RECEPTION, REQUIRING THE
OPERATOR TO TAKE WHATEVER STEPS ARE NECESSARY
TO CORRECT THE INTERFERENCE.
IKIGonamic
1555 BRUMMEL AVENUE, ELK GROVE VILLAGE, IL 60007
TELEPHONE: (312) 364-6633 FAX: (312) 364-1368 TELEX: 6871385 KONAM UW
">
