“Home” SCREEN OPERATION. Toyota Sequoia

1. BASIC INFORMATION BEFORE OPERATION

3. TOUCH SCREEN OPERATION

This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.)



When a screen button is touched, a beep sounds. (To set the beep sound,

see page 54.)

NOTICE

●

To prevent damaging the screen, lightly touch the screen buttons with your finger.

●

Do not use objects other than your finger to touch the screen.

●

Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen.

INFORMATION

●

If the system does not respond to touching the screen button, move your finger away from the screen and then touch it again.

●

Dimmed screen buttons cannot be operated.

●

The displayed image may become darker and moving images may be slightly distorted when the screen is cold.

●

In extremely cold conditions, the screen may not be displayed and the data input by a user may be deleted. Also, the screen buttons may not react properly.

●

When you look at the screen through polarized material such as polarized sunglasses, the screen may be dark and hard to see. If so, look at the screen from different angles, adjust the screen settings on the “Display Settings” screen or take off your sunglasses.

2

33