STMicroelectronics STP5N60M2 Datasheet
Reklaam
Reklaam
STD5N60M2, STP5N60M2, STU5N60M2
Datasheet
N-channel 600 V, 1.3 Ω typ., 3.5 A, MDmesh™ M2
Power MOSFETs in DPAK, TO-220 and IPAK packages
TAB
DPAK 1
3
TAB
TAB
TO-220
1
2
3
IPAK
1
2
3
D(2, TAB)
G(1)
S(3)
NG1D2TS3Z
Features
Order code V
DS
@ T
Jmax
STD5N60M2
STP5N60M2 650 V
STU5N60M2
• Extremely low gate charge
• Excellent output capacitance (C
OSS
) profile
• 100% avalanche tested
• Zener-protected
Applications
• Switching applications
R
DS(on)
max.
1.4 Ω
I
D
3.5 A
Description
These devices are N-channel Power MOSFETs developed using the MDmesh™ M2 technology. Thanks to their strip layout and improved vertical structure, these devices exhibit low on-resistance and optimized switching characteristics, rendering them suitable for the most demanding high-efficiency converters.
Product status links
STD5N60M2
STP5N60M2
STU5N60M2
DS9958 - Rev 5 - October 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
1
STD5N60M2, STP5N60M2, STU5N60M2
Electrical ratings
Electrical ratings
Table 1. Absolute maximum ratings
Symbol
V
GS
Gate-source voltage
Parameter
I
D
Drain current (continuous) at T
C
= 25 °C
Drain current (continuous) at T
C
= 100 °C
Drain current (pulsed) I
DM
P
TOT dv/dt
Total dissipation at T
C
= 25 °C dv/dt
T stg
T j
Peak diode recovery voltage slope
MOSFET dv/dt ruggedness
Storage temperature range
Operating junction temperature range
1. Pulse width limited by safe operating area.
2. I
SD
≤ 3.5 A, di/dt ≤ 400 A/μs; V
DS
peak < V
(BR)DSS
, V
DD
= 400 V.
3. V
DS
≤ 480 V.
Table 2. Thermal data
Symbol Parameter
R thj-case
R thj-pcb
R thj-amb
Thermal resistance junction-case
Thermal resistance junction-pcb
Thermal resistance junction-ambient
1. When mounted on 1 inch² FR-4, 2 Oz copper board.
DPAK
50
Table 3. Avalanche characteristics
Symbol
I
AR
E
AS
Single pulse avalanche energy
1. Pulse width limited by T jmax
2. Starting T j
= 25 °C, I
D
= I
AR
, V
DD
= 50 V
Parameter
Avalanche current, repetitive or not repetitive (1)
Value
TO-220
2.8
62.5
Value
±25
3.5
2.2
14
45
15
50
-55 to 150
IPAK
100
Value
0.5
80
Unit
V
A
A
W
V/ns
°C
Unit
°C/W
Unit
A mJ
DS9958 - Rev 5 page 2/27
2
STD5N60M2, STP5N60M2, STU5N60M2
Electrical characteristics
Electrical characteristics
(T case
= 25 °C unless otherwise specified)
Table 4. On/off states
Symbol
V
(BR)DSS
I
DSS
I
GSS
V
GS(th)
R
DS(on)
Parameter Test conditions
Drain-source breakdown voltage V
GS
= 0 V, I
D
= 1 mA
V
GS
= 0 V, V
DS
= 600 V
Zero gate voltage drain current
Gate-body leakage current
V
GS
= 0 V, V
DS
= 600 V,
T
C
V
DS
= 0 V, V
GS
= ±25 V
Gate threshold voltage V
DS
= V
GS
, I
D
= 250 µA
Static drain-source on-resistance V
GS
= 10 V, I
D
= 1.7 A
1. Defined by design, not subject to production test.
Min.
600
2
Typ.
Max.
Unit
V
1
µA
100
3
1.3
±10
4
1.4
µA
V
Ω
Table 5. Dynamic
Symbol
C iss
C oss
C rss
C oss eq.
R
G
Q
Q
Q g gs gd
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Equivalent output capacitance
Intrinsic gate resistance
Total gate charge
Gate-source charge
Gate-drain charge
V
V
V
DS
GS
DS
Test conditions
= 100 V, f = 1 MHz,
= 0 V
= 0 to 480 V, V
GS f = 1 MHz open drain
= 0 V
V
DD
= 480 V, I
D
= 3.5 A,
V
GS
= 0 to 10 V
(see
Figure 16. Test circuit for gate charge behavior
)
Min.
-
-
-
-
-
-
-
-
Typ.
211
13
0.75
19.5
6.2
8
1.6
4.4
Max.
-
-
-
-
-
-
-
-
Unit pF pF
Ω nC
1. C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss to 80% V
DSS
.
when V
DS
increases from 0
Symbol t d(on) t r t d(off) t f
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Table 6. Switching times
Test conditions
V
DD
= 300 V, I
D
= 1.7 A,
R
G
= 4.7 Ω, V
GS
= 10 V
(see
Figure 15. Test circuit for resistive load switching times and
Figure 20. Switching time waveform
)
Min.
-
-
-
-
Typ.
12
3
70
15
Max.
-
-
-
-
Unit ns
DS9958 - Rev 5 page 3/27
STD5N60M2, STP5N60M2, STU5N60M2
Electrical characteristics
Table 7. Source-drain diode
Symbol
I
SD
I
SDM
V
SD
I
I t
Q t
Q rr rr rr
RRM rr
RRM
Parameter
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
1. Pulse width is limited by safe operating area.
2. Pulse test: pulse duration = 300 µs, duty cycle 1.5 %.
Test conditions
V
GS
= 0 V, I
SD
= 3.5 A
I
SD
= 3.5 A, di/dt = 100 A/µs,
V
DD
= 60 V
(see
Figure 17. Test circuit for inductive load switching and diode recovery times
)
I
SD
= 3.5 A, di/dt = 100 A/µs,
V
DD
= 60 V, T j
= 150 °C
(see
Figure 17. Test circuit for inductive load switching and diode recovery times
)
Min.
-
-
-
-
-
-
-
-
9.5
314
1.5
9.5
Typ.
Max.
3.5
14
1.6
220
1.05
Unit
A
A
V ns
µC
A ns
µC
A
DS9958 - Rev 5 page 4/27
STD5N60M2, STP5N60M2, STU5N60M2
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for DPAK and IPAK
I D
(A)
AMG310520161200MT
10
1
0.1
0.01
0.1
1
DS(on)
Operation in this area is
Limited by max R
10
Tj=150°C
Tc=25°C
Single pulse
100 V
DS
(V)
10µs
100µs
1ms
10ms
Figure 3. Safe operating area for TO-220
I
D
(A)
AMG310520161202MT
10
1
0.1
0.01
0.1
1
DS(on)
Operation in this area is
Limited by max R
10
Tj=150°C
Tc=25°C
Single pulse
100 V DS (V)
10µs
100µs
1ms
10ms
I
D
(A)
Figure 5. Output characteristics
AMG310520161201MT
V
GS
=8, 9, 10V
6
5
7V
6V
4
3
2
5V
1
0
0 5 10 15
4V
20 V
DS
(V)
Figure 2. Thermal impedance for DPAK and IPAK
Figure 4. Thermal impedance for TO-220
4
3
2
1
0
0
I
D
(A)
6
Figure 6. Transfer characteristics
AMG310520161203MT
V
DS
=18V
5
2 4 6 8 10 V
GS
(V)
DS9958 - Rev 5 page 5/27
Figure 7. Gate charge vs gate-source voltage
V
GS
(V)
12
GIPD310520161345QVG V
DS
(V)
600
10
V
DS
500
V
DD
= 480 V
I
D
= 3.5 A
8 400
6
4
2
0
0 2 4 6 8
300
200
100
Q
0 g
(nC)
C
(pF)
Figure 9. Capacitance variations
AMG310520161205MT
1000
Ciss
100
10
1
0.1
0.1
1 10
Coss
Crss
100 V
DS
(V)
Figure 11. Normalized gate threshold voltage vs temperature
V
GS(th)
(norm)
1.15
1.10
1.05
1.00
0.95
0.90
0.85
0.80
0.75
0.70
-50 -25 0
I
D
=250µA
25 50 75
AMG310520161207MT
100 T J (°C)
STD5N60M2, STP5N60M2, STU5N60M2
Electrical characteristics (curves)
Figure 8. Static drain-source on-resistance
AMG310520161204MT R
DS(on)
( Ω )
1.380
V
GS
=10V
1.360
1.340
1.320
1.300
1.280
1.260
1.240
0.5
1.5
2.5
3.5
I D (A)
Figure 10. Output capacitance stored energy
AMG310520161206MT E oss
(µJ)
1.5
1
0.5
0
0 100 200 300 400 500 600 V DS (V)
Figure 12. Normalized on-resistance vs temperature
R
DS(on)
(norm)
AMG310520161208MT
I
D
=1.7A
V
GS
=10V
2.3
2.1
1.9
1.7
1.5
1.3
1.1
0.9
0.7
0.5
-50 -25 0 25 50 75 100 T
J
(°C)
DS9958 - Rev 5 page 6/27
STD5N60M2, STP5N60M2, STU5N60M2
Electrical characteristics (curves)
Figure 13. Normalized V
(BR)DSS
vs temperature
V
(BR)DSS
(norm)
AMG310520161209MT
I
D
=1mA
1.1
1.08
1.06
1.04
1.02
1
0.98
0.96
0.94
0.92
0.9
-50 -25 0 25 50 75 100 T J (°C)
Figure 14. Source- drain diode forward characteristics
AMG310520161210MT
V SD
(V)
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0.5
1.5
T
J
=-50°C
T
J
=150°C
2.5
T
J
=25°C
3.5
I SD (A)
DS9958 - Rev 5 page 7/27
STD5N60M2, STP5N60M2, STU5N60M2
Test circuits
3
Test circuits
Figure 15. Test circuit for resistive load switching times
V
GS pulse width
V
D
R
G
R
L
+
2200
μF
3.3
μF
D.U.T.
V
DD
AM01468v1
Figure 17. Test circuit for inductive load switching and diode recovery times
Figure 16. Test circuit for gate charge behavior
12 V
V
GS pulse width
2200
μF
+
1 kΩ
I
G
= CONST
2.7 kΩ
47 kΩ
47 kΩ
100 nF
100 Ω
V
DD
1 kΩ
D.U.T.
V
G
AM01469v1
Figure 18. Unclamped inductive load test circuit
G
25 Ω
D
A
D.U.T.
S
B
+
_
R
G
A A fast diode
B
B
G
100 µH
D
D.U.T.
3.3
µF
S
+
1000
µF
V
DD
AM01470v1
Figure 19. Unclamped inductive waveform
V (BR)DSS
V D
I
DM
I D
V DD V DD
AM01472v1
V i pulse width
V
D
L
I
D
+
2200
µF
3.3
µF
V
DD
D.U.T.
AM01471v1
0
Figure 20. Switching time waveform t d(on) t on t r t d(off) t off t f
90% 90%
10%
V
GS
V
DS
90%
10%
0 10%
AM01473v1
DS9958 - Rev 5 page 8/27
4
STD5N60M2, STP5N60M2, STU5N60M2
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
. ECOPACK ® is an ST trademark.
DS9958 - Rev 5 page 9/27
4.1
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) type A2 package information
DPAK (TO-252) type A2 package information
Figure 21. DPAK (TO-252) type A2 package outline
DS9958 - Rev 5
0068772_type-A2_rev25 page 10/27
DS9958 - Rev 5
Dim.
c2
D
D1
E
E1 e e1
A
A1
A2 b b4 c
L2
L4
R
V2
H
L
L1
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) type A2 package information
Table 8. DPAK (TO-252) type A2 mechanical data mm
Typ.
9.35
1.00
2.60
0.65
0.60
4.95
6.40
5.10
2.159
4.445
0.64
5.20
0.45
0.48
6.00
Min.
2.20
0.90
0.03
5.10
5.20
2.286
4.572
2.80
0.80
0.20
0°
10.10
1.50
3.00
0.95
1.00
5.25
6.60
5.30
2.413
4.699
0.90
5.40
0.60
0.60
6.20
Max.
2.40
1.10
0.23
8° page 11/27
4.2
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) type C2 package information
DPAK (TO-252) type C2 package information
Figure 22. DPAK (TO-252) type C2 package outline
DS9958 - Rev 5
0068772_C2_25 page 12/27
DS9958 - Rev 5
Dim.
L
L1
L2
L3
L4
L6
θ1
θ2
V2 c2
D
D1
E
E1 e
H
A
A1
A2 b b4 c
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) type C2 package information
Table 9. DPAK (TO-252) type C2 mechanical data
0.72
5.13
0.47
0.47
6.00
Min.
2.20
0.90
0.00
5.10
6.50
5.20
2.186
9.80
1.40
mm
Typ.
2.30
1.01
5.33
6.10
6.60
2.286
10.10
1.50
2.90 REF
0.90
0.60
5°
5°
0°
0.51 BSC
0.80
1.80 BSC
7°
7°
1.00
9°
9°
8°
0.85
5.46
0.60
0.60
6.20
Max.
2.38
1.10
0.10
5.60
6.70
5.50
2.386
10.40
1.70
1.25
page 13/27
4.3
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) type E package information
DPAK (TO-252) type E package information
Figure 23. DPAK (TO-252) type E package outline
DS9958 - Rev 5
0068772_type-E_rev.25
page 14/27
DS9958 - Rev 5
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) type E package information
Dim.
D
D1
E
E1 e e1
H
L
L1
L2
L4
A
A2 b b4 c c2
Table 10. DPAK (TO-252) type E mechanical data
Min.
2.18
mm
Typ.
5.97
5.21
6.35
4.32
0.65
4.95
0.46
0.46
2.286
4.572
9.94
1.50
0.89
2.74
Figure 24. DPAK (TO-252) recommended footprint (dimensions are in mm)
10.34
1.78
1.27
1.02
Max.
2.39
0.13
0.884
5.46
0.61
0.60
6.22
6.73
FP_0068772_25 page 15/27
4.4
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) packing information
DPAK (TO-252) packing information
Figure 25. DPAK (TO-252) tape outline
T
Top cover tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
F
E
W
B1
K0
For machine ref. only including draft and radii concentric around B0
B0
A0 P1
User direction of feed
D1
User direction of feed
R
Bending radius
AM08852v1
DS9958 - Rev 5 page 16/27
DS9958 - Rev 5
Dim.
D1
E
F
K0
P0
A0
B0
B1
D
P1
P2
R
T
W
A
D
B
STD5N60M2, STP5N60M2, STU5N60M2
DPAK (TO-252) packing information
Figure 26. DPAK (TO-252) reel outline
T
40mm min. access hole at slot location
C
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
AM06038v1
2.55
3.9
7.9
1.9
40
0.25
15.7
1.5
1.5
1.65
7.4
Table 11. DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min.
6.8
10.4
Max.
7
10.6
12.1
1.6
C
D
A
B
G
N
T
Min.
1.5
12.8
20.2
16.4
50 1.85
7.6
2.75
4.1
8.1
2.1
0.35
16.3
Base qty.
Bulk qty.
mm
Max.
330
13.2
18.4
22.4
2500
2500 page 17/27
4.5
STD5N60M2, STP5N60M2, STU5N60M2
TO-220 type A package information
TO-220 type A package information
Figure 27. TO-220 type A package outline
DS9958 - Rev 5
0015988_typeA_Rev_21 page 18/27
DS9958 - Rev 5
Dim.
E e e1
F
H1
J1
L b1 c
A b
D
D1
L1
L20
L30
øP
Q
STD5N60M2, STP5N60M2, STU5N60M2
TO-220 type A package information
Table 12. TO-220 type A package mechanical data mm
Typ.
Min.
4.40
0.61
1.14
0.48
15.25
1.27
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
16.40
28.90
3.75
2.65
3.85
2.95
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
Max.
4.60
0.88
1.55
0.70
15.75
page 19/27
4.6
STD5N60M2, STP5N60M2, STU5N60M2
IPAK (TO-251) type A package information
IPAK (TO-251) type A package information
Figure 28. IPAK (TO-251) type A package outline
DS9958 - Rev 5
0068771_IK_typeA_rev14 page 20/27
DS9958 - Rev 5
Dim.
D
E e c c2 e1
H
L
L1
L2
V1
A
A1 b b2 b4
B5
STD5N60M2, STP5N60M2, STU5N60M2
IPAK (TO-251) type A package information
Table 13. IPAK (TO-251) type A package mechanical data mm
Typ.
Min.
2.20
0.90
0.64
5.20
0.45
0.48
6.00
6.40
4.40
9.00
0.80
0.30
2.28
16.10
0.80
10°
0.60
0.60
6.20
6.60
4.60
Max.
2.40
1.10
0.90
0.95
5.40
9.40
1.20
1.00
page 21/27
4.7
STD5N60M2, STP5N60M2, STU5N60M2
IPAK (TO-251) type C package information
IPAK (TO-251) type C package information
Figure 29. IPAK (TO-251) type C package outline
DS9958 - Rev 5
0068771_IK_typeC_rev14 page 22/27
DS9958 - Rev 5
Dim.
c2
D
D1
E
E1 e e1
A
A1 b b2 b4 c
L2
θ1
θ2
H
L
L1
STD5N60M2, STP5N60M2, STU5N60M2
IPAK (TO-251) type C package information
Table 14. IPAK (TO-251) type C package mechanical data
Min.
2.20
0.90
0.66
mm
Typ.
2.30
1.00
5.20
6.50
4.60
2.20
4.40
5.23
0.46
0.46
6.00
16.18
9.00
0.80
0.90
3°
1°
5.33
6.10
5.37
6.60
4.78
2.25
4.50
16.48
9.30
1.00
1.08
5°
3°
16.78
9.60
1.20
1.25
7°
5°
5.55
6.70
4.95
2.30
4.60
0.90
5.43
0.59
0.59
6.20
Max.
2.35
1.10
0.79
page 23/27
STD5N60M2, STP5N60M2, STU5N60M2
Ordering information
5
Ordering information
Order code
STD5N60M2
STP5N60M2
STU5N60M2
Table 15. Ordering information
Marking
5N60M2
Package
DPAK
TO-220
IPAK
Packing
Tape and reel
Tube
DS9958 - Rev 5 page 24/27
STD5N60M2, STP5N60M2, STU5N60M2
Revision history
Date
30-Sep-2013
20-Mar-2014
08-Jun-2016
16-Jun-2016
01-Oct-2018
2
3
4
5
Table 16. Document revision history
Revision
1
Changes
First release.
– Modified: ID, IDM and note 2 values in Table 2
– Modified: the entire values in Table 4
– Modified: RDS(on) typical and ID values in Table 5
– Modified: the entire typical values, ISD and ISDM in Table 6, 7 and 8
– Updated: Section 4.1: DPAK, STD5N60M2
– Minor text changes
Updated title, features, applications and description in cover page. Updated
Section 1: "Electrical ratings", Table 6: "Dynamic" and Section 2.1: "Electrical characteristics (curves)" .
Updated IPAK C
Minor text changes
Updated Figure 1: "Internal schematic diagram" .
Updated Table 7: "Switching times" and Table 8: "Source-drain diode" .
Minor text changes.
Updated Section 4 Package information
.
Minor text changes
DS9958 - Rev 5 page 25/27
STD5N60M2, STP5N60M2, STU5N60M2
Contents
Contents
DS9958 - Rev 5 page 26/27
STD5N60M2, STP5N60M2, STU5N60M2
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS9958 - Rev 5 page 27/27
Laadi alla
Avalik link on uuendatud
Teie vestluse avalik link on uuendatud. You may view and manage your chat links after registration here.
Dokumendi avalik link
Reklaam