Accessories tab. Brother 5450DN, HL-5450DNT, HL-5450DN

Driver and Software

Accessories tab

2

Note

To access the Accessories tab, see Accessing the printer driver settings uu page 25.

You can define the paper size for each paper tray and auto detect the serial number in the Accessories tab as follows.

2

1

3

4

2

 Available Options / Installed Options (1)

You can manually add and remove the options that are installed on the machine. Tray settings will match the installed options.

 Paper Source Setting (2)

This feature identifies the paper size defined for each paper tray.

• Paper Size

This setting allows you to define which paper size is used for each tray. Highlight the tray you want to define and then choose the paper size from the pull-down menu. Click Update to apply the setting to the tray. When using more than one paper size you must define the paper size for each tray so the paper is pulled from the correct tray.

• Default Source

This setting allows you to choose the default paper source that your document will be printed from.

Choose the Default Source from the pull-down menu and click Update to save your setting. The

Auto Select setting will automatically pull paper from any tray that has a defined paper size that matches your document.

 Serial No. (3)

By clicking Auto Detect (4), the printer driver will probe the machine and display its serial number. If it fails to receive the information, the screen will display “---------------”.

41

Driver and Software

 Auto Detect (4)

The Auto Detect function finds the currently installed optional devices and shows the available settings in the printer driver. When you click Auto Detect, options that are installed on the machine will be listed in

Available Options (1). You can manually add or remove the options by choosing an optional device you want to add or remove, and then clicking Add or Remove.

Note

The Auto Detect (4) function is not available under the following machine conditions:

• The machine power switch is off.

• The machine is in an error state.

• The machine is connected to the print server using a USB or parallel cable in a shared network environment.

• The cable is not connected to the machine correctly.

2

42