advertisement
![3™ language emulation). Brother 5450DN, HL-5450DNT, HL-5450DN | Manualzz 3™ language emulation). Brother 5450DN, HL-5450DNT, HL-5450DN | Manualzz](http://s1.manualzz.com/store/data/001092382_1-6ecc709dd462594a7bcc49d0b17515a0-360x466.png)
Driver and Software
Features in the BR-Script3 printer driver (PostScript
®
3™ language emulation)
2
This section introduces the distinctive operations of the BR-Script3 printer driver. For the basic operations of
Cover Page, Paper Source and Layout.
Note
If you want to setup the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and visit FAQ’s on your model page for instructions.
Choosing printing options
To control special printing features, choose Printer Features from the Print dialog box.
2
2
63
Driver and Software
Printer Features
Feature Sets: General 1
Print Quality
You can change the resolution as follows:
• 300 dpi
• 600 dpi
• HQ 1200
• 1200 dpi
Media Type
You can change the media type to one of the following:
• Plain Paper
• Thin Paper
• Thick Paper
• Thicker Paper
• Bond Paper
• Envelopes
• Env. Thick
• Env. Thin
• Recycled Paper
• Label
• Hagaki
1
Postcard with the size specified by Japan Post Service Co., LTD
2
2
64
Driver and Software
Toner Save
You can conserve toner using this feature. When you check Toner Save, your prints appear lighter. The default setting is Off.
Note
• We do not recommend Toner Save for printing Photo or Greyscale images.
• Toner Save is not available for HQ 1200 and 1200 dpi resolutions.
Sleep Time [Min.]
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode, the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be reset to the specific time set at the factory; this can be altered in the driver. If you want to change the
Sleep Time, choose 2, 10 or 30.
While the machine is in Sleep Mode, the Ready LED is dimmed, but the machine can still receive data.
Receiving a print job will automatically wake up the machine to start printing.
Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The Default setting is on.
High Quality Image Printing
You can increase the quality of image printing. If you set High Quality Image Printing to On, the print speed will be slower.
2
65
Driver and Software
Feature Sets: General 2
Improve Print Output
This feature allows you to improve a print quality problem.
• Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting.
Note
This operation will decrease the temperature of the machine's fusing process.
• Improve Toner Fixing
If you choose this setting, the toner fixing capabilities may be improved. If this selection does not provide enough improvement, change the printer driver setting in Media Type to a thick setting.
Note
This operation will increase the temperature of the machine's fusing process.
Ghost Reduction Setting
If you are using the machine in a high humidity environment this setting may reduce ghosting on the paper.
Do not use this setting if the ambient humidity is below 30% or ghosting may increase.
Note
This feature may not reduce ghosting for all types of paper. Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.
Density Adjustment
Increase or decrease the print density.
66
2
advertisement
Key Features
- Laser
- 2400 x 600 DPI
- A4 38 ppm
- Duplex printing
- Ethernet LAN
- Total number of input trays: 3 Total input capacity: 750 sheets Total output capacity: 150 sheets
- Internal memory: 64 MB 400 MHz
Related manuals
advertisement
Table of contents
- 7 About this Machine
- 7 Front view and Back view
- 8 Acceptable paper and other print media
- 8 Recommended paper and print media
- 8 Type and size of paper
- 10 Handling and using special paper
- 13 Unprintable area when printing from a computer
- 14 Loading paper
- 14 Loading paper and print media
- 14 Loading paper in the standard paper tray and the optional lower tray
- 18 Loading paper in the multi-purpose tray (MP tray)
- 24 Duplex (2-sided) printing
- 24 Guidelines for printing on both sides of the paper
- 25 Automatic duplex printing
- 27 Manual duplex printing
- 28 Printer driver
- 29 Printing a document
- 30 Printer driver settings
- 31 Accessing the printer driver settings
- 32 printer driver
- 32 Basic tab
- 37 Advanced tab
- 45 Print Profiles tab
- 47 Accessories tab
- 49 Support
- 51 3™ language emulation)
- 57 Uninstalling the printer driver
- 58 Status Monitor
- 60 Macintosh
- 60 Features in the printer driver (Macintosh)
- 60 Choosing page setup options
- 69 3™ language emulation)
- 73 Removing the printer driver
- 74 Status Monitor
- 76 Software
- 76 Software for networks
- 76 only)
- 77 Control panel
- 77 LEDs (Light Emitting Diodes)
- 85 Service call indications
- 87 Control panel keys
- 88 Print a test page
- 88 Using the Go key
- 88 Using the printer driver
- 89 Print a Printer Settings page
- 89 Using the Go key
- 89 Using the printer driver
- 90 Print Fonts
- 90 Using the Go key
- 90 Using the printer driver
- 91 Security features
- 91 Secure Function Lock 2.0 (HL-5450DN(T) only)
- 92 Ecology features
- 92 Toner Save
- 92 Sleep Time
- 92 Deep Sleep mode
- 93 Power Down mode
- 94 Quiet mode feature
- 94 Turning Quiet mode on/off
- 96 Lower tray (LT-5400)
- 97 SO-DIMM (HL-5450DN(T) only)
- 97 SO-DIMM types
- 98 Installing extra memory
- 100 Replacing consumable items
- 101 Replacing the toner cartridge
- 109 Replacing the drum unit
- 116 Cleaning and Checking the machine
- 116 Cleaning the outside of the machine
- 118 Cleaning the corona wire
- 120 Cleaning the drum unit
- 125 Cleaning the paper pick-up roller
- 126 Packing and shipping the machine
- 129 Identifying your problem
- 130 Error messages in the Status Monitor
- 133 Paper jams
- 144 If you are having difficulty with your machine
- 148 Improving the print quality
- 155 Machine Information
- 155 Default settings
- 157 Machine specifications
- 157 General
- 159 Print media
- 160 Printer
- 160 Interface
- 161 Computer requirements
- 162 Important information for choosing your paper
- 163 Symbol and character sets
- 164 Consumable Items
- 164 Network (LAN)
- 165 Brother numbers