_9111_Counter_Stop. HP (Hewlett-Packard) NuDAQ PCI-9111HR, PCI-9111DG/HR

C/C++ (DOS)

U16 _9111_Counter_Read (U16 cardNo, U16 *c0)

C/C++ (Windows 95)

U16 W_9111_Counter_Read (U16 cardNo, U16 *c0)

Visual Basic (Windows 95)

W_9111_Counter_Read (ByVal cardNo As Integer, c0 As Integer)

As Integer

@ Argument cardNo: The card number of PCI-9111 card initialized. c0: count value of counter#0

@ Return Code

ERR_NoError

5.31 _9111_Counter_Stop

@ Description

This function is used to stop the timer operation. The timer is set as the

“One-shot” mode with count value ‘0’. That is, the clock output signal will be set to high after executing this function.

@ Syntax

C/C++ (DOS)

U16 _9111_Counter_Stop (U16 cardNo, U16 *c0)

C/C++ (Windows 95)

U16 W_9111_Counter_Stop (U16 cardNo, U16 *c0)

Visual Basic (Windows 95)

U16 W_9111_Counter_Stop (ByVal cardNo As Integer, c0 As Integer)

As Integer

@ Argument cardNo: The card number of PCI-9111 card initialized. c0: the current count value of the Counter#0

@ Return Code

ERR_NoError

54 • C/C++ Library