advertisement
32 allll FFu on
Pause Dialing from a Stored Phonebook Entry
1. Dial the number of the service from Phonebook.
2. If you stored the number using a hard pause(s), wait for the appropriate prompt from the number you are calling. When prompted, press the key to send the DTMF (Dual Tone Multi-Frequency) number that follows your pause.
If you stored the number using a two second pause(s), your phone transmits the number that follows the “T” pause two seconds after the connection.
3. “Sending DTMF” flashes on the display and the transmitted tone sounds.
4. Repeat from step 2, if necessary.
allll FFu nccttiio
Manual Pause Dialing
You can enter pauses manually during the dialing process.
1. Enter the phone number of the service you want to call, such as a bank’s teleservice phone number.
2. Press the MENU key to access the options.
3. Select the pause you want type and press the OK key.
• Press the 4 key for Hard Pause. The letter “P” displays, meaning that a hard pause will occur at that point in the dialing sequence.
• Press the 5 key for 2sec Pause. The letter “T” displays, meaning that a “Timed” pause will occur at that point in the dialing sequence.
4. Enter the number to be sent after the pause and then press the key to dial the first number.
5. For a hard pause, press the key again at the prompt to send the additional number after connecting.
If you enter the number using a 2-second pause(s), the phone sends the number that follows the pause two seconds after the connection.
33
advertisement