Scanning Mode. JVC CA-NXG9

Changing the Color System and Scanning

Mode

You can select the video output to match it to the color system of your TV (NTSC or PAL).

• If you connect a progressive TV through the

COMPONENT jacks, you can enjoy a high quality picture by selecting progressive scanning mode.

• You can change the setting only while playback is stopped.

1

2

NTSC / PAL

NTSC PRGR/

PAL PRGR

NTSC or PAL Interlaced scanning.

For a conventional NTSC or PAL

TV.

NTSC or PAL Progressive scanning.

For a progressive NTSC or PAL TV.

• The PRGR indicator lights up on the display.

Front panel

To the headphones

From the digital audio player

From the USB mass storage class device

When connecting a USB mass storage class device

USB cable (not supplied)

To the microphones (only for CA-NXG7)

See page 33.

• You cannot connect JVC Everio camcorder to the

USB REC/PLAY ( ) terminal of the System.

• Noise and static electricity may stop the USB mass storage class device sound. In this case, disconnect and connect the USB mass storage class device again after turning off the System.

When connecting a digital audio player

7

• When connecting with a USB cable, use the USB 2.0 cable whose length is less than 1 m.

• You can connect a USB mass storage class device such as a USB flash memory device, hard disk drive, multimedia card reader, etc. to this System.

• You cannot connect a computer to the USB REC/

PLAY ( ) terminal of the System.

Stereo mini plug

(not supplied)

From audio output (or headphone out, etc.)

• See page 14 for audio input level.