advertisement
On-Screen Operations
(see pages 38 to 42)
On-screen Bar Operations:
• A-B Repeat is available only within the same title/ program/track.
Daily Timer Operations
(see pages 43 and 44)
Setting the Daily Timer:
• If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when the timer is activated.
• When you unplug the power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will not work correctly.
• If you set the Sleep Timer after Daily Timer starts playing the selected source, Daily Timer is canceled.
Setup Menu Operations
(see pages 45 and 46)
General:
• If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV.
LANGUAGE menu:
• When the language you have selected for “MENU
LANGUAGE,” “AUDIO LANGUAGE,” or
“SUBTITLE” is not recorded, the original language is used as the initial language.
PICTURE menu—MONITOR TYPE:
• Even if “4:3 PS” is selected, the screen size may become 4:3 letter box while playing a disc/file. This depends on how the discs are recorded.
• When you select “16:9” for a picture whose aspect ratio is 4:3, the picture changes slightly due to the process of converting the picture width.
OTHERS menu—ON SCREEN GUIDE:
• The setup menu and on-screen bar will be displayed
(and recorded) even if this function is set to “OFF.”
Subtitles and the information for zoom-in always appear on the display regardless of this setting.
Operating JVC’s TVs Using the Remote
Control
Remote control
TV/VIDEO
SHIFT
TV
(CA-NXG7)
You can use the remote control to operate JVC’s TVs.
TV Turn on/off TV.
TV/VIDEO
TV CHANNEL
+, –
Change the input mode.
Change the channel.
TV VOL +, –
(NX-G3)
Adjust the TV volume.
While holding SHIFT, press...
TV VOL +, –
(CA-NXG7)
Adjust the TV volume.
50
advertisement