- Computers & electronics
- Computer components
- System components
- Audio cards
- AJA
- KONA LH/LHe
- User manual
advertisement
![Easy Setups for Typical Uses. AJA KONA LH/LHe | Manualzz Easy Setups for Typical Uses. AJA KONA LH/LHe | Manualzz](http://s1.manualzz.com/store/data/007251165_1-05d560cfdd383cc754c7fe9ec0b2871e-360x466.png)
KONA LHe Installation and Operation Manual — Easy Setups for Typical
Easy Setups for Typical Uses
Final Cut and KONA LHe together make working with multiple formats an easy proposition.
Inside of Final Cut, equipment and setting presets are available in groups called Easy Setups, from which you can choose typical system configurations. A large set of Easy Setups are supplied with KONA LHe and installed along with the KONA LHe software. At installation you can choose exactly which sets of Easy Setups you want. These canned choices can be used directly or as the basis for making your own customized Easy Setups unique to your system. By duplicating an Easy Setup and then making changes to it, you simplify the process of configuring and re-configuring when working with new formats.
Although this manual assumes you’re familiar with Final Cut Pro and have read its documentation, let’s review Easy Setups and how to use them effectively with KONA LHe.
1 control, and for project sequences. These presets are defined in the Audio/Video Settings menu.
Just like Easy Setups, here also there are factory defined choices, plus you can create and make your own. When you have a set of presets you want to use again, you can store them as an “Easy
Setup.”
On the following pages we’ll further review the Easy Setups menu and Audio/Video Settings
Menu.
53
Easy Setups Menu
Both the Easy Setups menu item and the Audio/Video Settings menu item are located under the main Final Cut Pro menu.
Easy Setup and Audio/Video Menu Items
Click on the Easy Setups menu item and Final Cut Pro will present the Easy Setup dialog window:
54
Easy Setup dialog
At the top of the Easy Setup dialog is the currently selected Easy Setup. It can be changed by clicking on the pulldown arrow at the right. Doing so results in a long list of the factory Easy
Setups stored on the system. If you wish to see all of the Easy Setups, factory and userdefined, then ensure the “Show All” checkbox is marked at the right side of the dialog. By default, all AJA Easy Setups will be checked.
A large set of Easy
Setups are
Provided as KONA
LH defaults
Factory Easy Setups
To choose a new Easy Setup from the list, click on the pulldown menu and select a desired choice. The choice won’t take effect until you click the Setup button, but you will be able to see
advertisement
Related manuals
advertisement
Table of contents
- 7 Table of Contents
- 7 Overview
- 7 Features
- 8 KONA LHe Audio
- 8 Software
- 8 What’s In The Box?
- 10 System Requirements
- 10 Minimum and Recommended System and Software Requirements
- 11 Understanding Disk Storage Methods
- 11 About RAIDs
- 12 Software For Striping
- 12 Storage capacity
- 13 Cable Connections
- 13 Using the Breakout Cable and 3 BNCs
- 13 Using KL-box
- 14 About BNC Connectors
- 14 Connector Descriptions—Cables and KL-box
- 14 SDI Input and Outputs
- 15 2 Channel Digital AES/EBU Audio Inputs And Outputs
- 15 Analog 2 Channel Balanced Audio
- 15 Analog 2 Channel Unbalanced Audio (KL-box only)
- 15 RS422 Machine Control
- 15 Analog Monitor Out (Component/Composite HD/SD)
- 15 Reference Video
- 16 In This Manual
- 17 Chapter 2: Getting Started—WorkflowKONA LHe And Your Workflow
- 18 Understanding Typical Workflows
- 18 PhotoJPEG
- 18 DV (DV25)
- 18 DVCPRO HD
- 20 Apple ProRes 422 and Apple ProRes 422 HQ (SD or HD)
- 20 Uncompressed 8-bit
- 20 Uncompressed 10-bit
- 21 Mixing and Matching Formats in Final Cut
- 23 Installation Overview
- 23 Unpacking
- 23 Shipping Box Contents
- 25 Installing the KONA LHe Card in a Mac Pro
- 26 Installing the KONA LHe Card in a G
- 27 Cabling the System
- 27 System Video/Audio Cable Connections
- 27 System Cabling When Using The Breakout Cable
- 28 Typical System
- 29 Installing KONA LHe Software
- 29 Software Installation Procedure
- 33 Genlock and Your System
- 35 Final Cut Pro
- 35 Using The KONA LHe Control Panel
- 35 Control Panel Basics
- 39 Control Tab Screen
- 39 Control Tab Screen Settings
- 41 Formats Tab Screen
- 42 Format Screen Settings
- 43 Input Select Tab Screen
- 43 Input Screen Settings
- 44 Proc Amp Screen
- 45 SDI Output Screen
- 45 SDI Output Screen Settings
- 46 Analog Out Screen
- 46 Analog Out Screen Settings
- 47 Video Setup Screen
- 47 Setup Screen Settings
- 48 Audio Setup Screen
- 48 Audio Setup Screen Settings
- 49 Conversion Tab Screen
- 49 Conversion Tab Screen Settings
- 51 DS Keyer Screen
- 51 DS Keyer Screen Settings
- 52 Timecode Screen
- 52 Timecode Screen Settings
- 53 Timelapse Tab Screen
- 54 Info Screen
- 55 Saving Your Control Panel Presets
- 55 Who is Controlling KONA LHe?
- 56 QuickTime Application—1st Priority
- 56 Mac Desktop Video—2nd Priority
- 57 KONA Control Panel—3rd Priority
- 57 Control Recommendations
- 58 Using Multiple AJA Products
- 58 Notes on using multiple AJA Products
- 59 Easy Setups for Typical Uses
- 59 Easy Setups Menu
- 61 Easy Setups For Use With KONA LHe
- 61 Audio/Video Settings Menu
- 62 To Create A New Easy Setup
- 63 The Sequence Presets Window
- 69 Checking the System with a Simple Test Project of Bars and Tone
- 72 Using 8-bit Versus 10-bit Video
- 73 If You Run Into Problems
- 74 Updating Software
- 74 Support
- 75 Apple Resources