- Computers & electronics
- Computer components
- System components
- Audio cards
- AJA
- KONA LH/LHe
- User manual
advertisement
Apple Resources
KONA LHe Installation and Operation Manual — Support
If the problem is an AJA Video KONA LHe issue, then contact AJA Video Customer Support using one of the methods listed below:
Contacting by Mail Address:
180 Litton Drive, Grass Valley, CA. 95945 USA
Telephone: 1.800.251.4224 or 1.530.274.2048
Fax: 1.530.274.9442
Web: http://www.aja.com
Support Email: [email protected]
69
Apple provides a large amount of support information online at their support website.
Information provided includes answers to top questions, discussions on specific topics, and software downloads for updates and utilities.
products. Information is provided on the Apple Support website on how to enroll in
AppleCare.
General Apple Support Website for information on all products: http://www.info.apple.com/
Mac Pro Support Area: http://www.apple.com/support/macpro/
Final Cut Pro Web Support: http://www.info.apple.com/usen/finalcutpro/
Final Cut Discussion Area:
http://www.apple.com/support/finalcutpro/
70
Appendix A: Specifications
Formats
Video Input
Video Output
525i 29.97
625i 25
720p 59.94
720p 60
1080i 25
1080i 29.97
1080i 50
1080psf 23.98
1080psf 24
Digital: 8 or 10 bit HD-SDI/SDI, SMPTE-259/292/296, Dual-rate
Analog:
Composite/S-Video (Y/C): NTSC, NTSCJ, PAL
12 bit A/D, 2x oversampling
3 line adaptive comb filter decoding
+/- .25 db to 5.0 MHz Y Frequency Response
+/- .25 db to 1 MHz C Frequency Response
.5% 2T pulse response
Component:
< 1.5% Diff Phase
< 1.5% Diff Gain
SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
12 bit A/D, 2x oversampling
+/- .25 db to 5.5 MHz Y Frequency Response
+/- .25 db to 2.5 MHz C Frequency Response
.5% 2T pulse response
<2 ns Y/C delay inequity
Digital: SD-SDI, SMPTE, 259M, 10-bits, BNC
HD-SDI SMPTE, 292/296, 10-bits, BNC
Analog:
Composite/S Video:
SD Component:
NTSC, NTSCJ, PAL
12 bit D/A, 8x oversampling
+/- .2 db to 5 MHz Y Frequency Response
+/- .2 db to 1 MHz C Frequency Response
.5% 2T pulse response
< 1% Diff Phase
< 1% Diff Gain
SMPTE/EBU N10, Betacam 525 line,
Betacam 525J, RGB
12 bit D/A, 8x oversampling
+/- .2 db to 5.5 MHz Y Frequency Response
+/- .2 db to 2.5 MHz C Frequency Response
.5% 2T pulse response
<1 ns Y/C delay inequity
A 1 1
A-2
Analog SD and HD Output, 12-bits, BNC:
HD:
SD:
YPbPr, RGB
YPbPr, RGB (component mode)
Composite/YC (composite mode)
Audio Input
Digital: 2-channel 24 bit AES/EBU, 48KHz sample rate
Synchronous or Non-synchronous
(Internal sample rate conversion)
24 bit SMPTE-259 SDI embedded audio, 8-ch, 48kHz synchronous
Analog: 2-channel balanced input
+24dbu Full Scale Digital
24 bit A/D, 48 KHz sample rate
+/- 0.2db 20 to 20 KHz Frequency Response
Audio Output
Digital: 2-ch 24-bit AES/EBU, 48 KHz sample rate
24 bit SMPTE-259 SDI embedded audio, 8-ch, 48 KHz synchronous
Analog: 2-channel Balanced output (XLR)
+24dbu Full Scale Digital (0dbFS)
24 bit D/A, 48 KHz sample rate
+/- 0.2db 20 to 20 KHz Frequency Response
2-channel unbalanced output (RCA-jack): requires KL-Box option
Down-Conversion
Hardware: 10-bit output, 24-bit internal processing
Anamorphic: full-screen
Letterbox: image is reduced with black top and bottom added to image
area with the aspect ratio preserved
Crop: image is cropped horizontally
Reference Input
Analog Color Black or HD Tri-level
1 BNC on standard breakout cable (75 ohm terminating)
KL-Box (optional): 2 BNCs, passive loop-through
Hardware Acceleration Provided
DVCProHD hardware acceleration
HDV hardware acceleration
Dynamic RT Extreme hardware acceleration
KONA LHe Installation and Operation Manual — Machine Control
A-3
Machine Control
RS-422, Sony 9-pin protocol Connector provided on KONA LHe breakout cable and on optional KL-
Box. 9-pin D-connector pinout is as follows:
1............. GND
2............. RX-
3............. TX+
4............. GND
5............. No Connection
6............. GND
7............. RX+
8............. TX-
9............. GND
Shell....... GND
1
A-4
KONA LH/LHe Installation and Operation Manual — Index
I-1
Index
Symbols
.pkg
Numerics
10-bit video
24 frames-per-second to 30 conversion
48kHz audio
8-bit Versus 10-bit Video
8-channel 24-bit 48kHz AES
9-pin D-connector
A
A/V Devices
AES audio
AES/EBU
AES/EBU Audio Inputs
Analog 4 Channel Balanced/Unbalanced Audio 9
analog component
analog composite
Analog Format
Analog monitor output
Analog Out Screen
Analog Out Screen Settings
Apple Support
aspect ratio
Audio Input
audio input/output
Audio Mapping
Audio Out
Audio/Video Settings
Audio/Video Settings Menu
B
Balanced
Bars and Tone, sample FCP project
Betacam
black burst
Black Level
block diagram element
Block Diagram Screen
BNC Connectors
BNCs for Audio
Box
Box Contents
Browser window
C
Cable Connections
Cable connector descriptions
cables
cables, what’s included
camcorders
capacity
Capture Preset
CD
Chassis Connections
Checking the System
codec settings
codecs
Color Meanings, Control Panel 32
COMMAND key
Component Analog Video Out
Component settings
Component/Composite
composite output
Composite settings
Connector Descriptions
connectors
Control Panel Presets
Conversion Icons
Conversion Icons, Control Panel 32
Crop
customer service
D data protection
DB9
Digital Out Screen Settings 39
Down (Conversion)
drivers
DV (DV25)
DV50
DVCProHD
E
Easy Setups Menu
I-2
embedded audio
F
Factory Easy Setups
Features
features
Fibre Channel
Field dominance
Final Cut Pro 4
Final Cut Pro and KONA
Final Cut Pro™
Final Cut Pro™ support
Foreground pre-multiplied (checkbox) 45
Format Screen Settings
format, primary
Formats and Transfer Rates/Storage Table 6
formats, mixing and matching 15
Frame Buffer over Matte
Frame Rate
Frame Size
Frame size
Framebuffer
G
Genlock
Genlock and Your System
graphic file, test pattern output
H
Hardware
hardware and software requirements 4
Hours of Storage
house reference sync
I
Icons
icons
Info Screen
Input Screen
Input Screen Settings
Input/Output
Installation Overview
Installation Software CD-Rom
Installer Screen
Installing Io Software
Installing the KONA Card 19, 20
Introduction, KONA 2
IRE
K
KL-Box connector descriptions
KL-Box, Front and Rear
keyed video
KONA Software
L
Letterbox
Limitations
Lock Input Audio Gain To Unity 42
Log On Authenticate Prompt
LTC
LUT
M
Machine Control
Machine Control, pinout
Manual
Matte
minimum hardware and software requirements
minimums
Mirroring
Mixing and Matching Formats
Monitor Audio
Monitor Out
O offset, video adjustment (timing)
OS X installer files
Output Pulldown Menu
P
pattern, test
PCI-Express slots
pinout, RS-422 D-connector
Pixel aspect ratio
playback device
Post-roll
Pre-roll
presets
Presets, KONA Control Panel 49
Primary
Primary format
KONA LH/LHe Installation and Operation Manual — Index
I-3
Print-to-tape
problem symptoms
Problems, what to do
problems, what to do if you encounter
progressive frame
36 progressive segmented frame 36
psf
Q
QuickTime Audio Settings
QuickTime video
QuickTime Video Settings
QuickTime™ Drivers, AJA KONA
R
RAID
RAID 0
RAID 1
RAID 5
RAIDs
RCA connector pair, KL-Box configuration 42
rear panel
Recommended System Requirements
Ref Loop
Reference Video
Requirements, System
RGB
RP 188 definition
RP-188
RP-188 Timecode
RS422
RS-422, Sony 9-pin protocol. 9-pin D-connector pinout
S sample rate
Sample rate conversion
Save Preset..
Scenarios, workflow
SCSI RAID
SDI embedded audio
SDI Input and Outputs
Secondary
Sequence Preset
Sequence window
set up
shipping
SMPTE protocol
SMPTE RP 188
snapshot, Control Panel settings 49
Software
Software CD
software files that have been installed
Software License Agreement Screen 25
software requirements
software updates
software, 3rd-party
Standard Cables
Storage capacity
Storage Methods
Striping
Striping data
Support, 3rd-party software
sync generator
synchronizing other video equipment
system configuration, Control Panel 29
system interconnections
T
Tabs available, Control Panel
Time Source
timebase
Timecode
Timecode Offset
Timecode Screen
Timecode Screen Settings
timing adjustment
Transfer Rate
Transfer Rate Table
Troubleshooting
typical system interconnections 22
Typical Workflows
U
Uncompressed 10-bit
uncompressed media
Unpacking
user and password
User Bits, RP-188
V
video and audio input/output connections
I-4
Video Format
Video Input
video input source
Video Monitor
video path
video processing properties
Video/Audio connections
VITC
VTR
VTR RS-422 Control Port
VTRs,
W
Workflow
X
Y
Y/R-Y/B-Y
advertisement
Related manuals
advertisement
Table of contents
- 7 Table of Contents
- 7 Overview
- 7 Features
- 8 KONA LHe Audio
- 8 Software
- 8 What’s In The Box?
- 10 System Requirements
- 10 Minimum and Recommended System and Software Requirements
- 11 Understanding Disk Storage Methods
- 11 About RAIDs
- 12 Software For Striping
- 12 Storage capacity
- 13 Cable Connections
- 13 Using the Breakout Cable and 3 BNCs
- 13 Using KL-box
- 14 About BNC Connectors
- 14 Connector Descriptions—Cables and KL-box
- 14 SDI Input and Outputs
- 15 2 Channel Digital AES/EBU Audio Inputs And Outputs
- 15 Analog 2 Channel Balanced Audio
- 15 Analog 2 Channel Unbalanced Audio (KL-box only)
- 15 RS422 Machine Control
- 15 Analog Monitor Out (Component/Composite HD/SD)
- 15 Reference Video
- 16 In This Manual
- 17 Chapter 2: Getting Started—WorkflowKONA LHe And Your Workflow
- 18 Understanding Typical Workflows
- 18 PhotoJPEG
- 18 DV (DV25)
- 18 DVCPRO HD
- 20 Apple ProRes 422 and Apple ProRes 422 HQ (SD or HD)
- 20 Uncompressed 8-bit
- 20 Uncompressed 10-bit
- 21 Mixing and Matching Formats in Final Cut
- 23 Installation Overview
- 23 Unpacking
- 23 Shipping Box Contents
- 25 Installing the KONA LHe Card in a Mac Pro
- 26 Installing the KONA LHe Card in a G
- 27 Cabling the System
- 27 System Video/Audio Cable Connections
- 27 System Cabling When Using The Breakout Cable
- 28 Typical System
- 29 Installing KONA LHe Software
- 29 Software Installation Procedure
- 33 Genlock and Your System
- 35 Final Cut Pro
- 35 Using The KONA LHe Control Panel
- 35 Control Panel Basics
- 39 Control Tab Screen
- 39 Control Tab Screen Settings
- 41 Formats Tab Screen
- 42 Format Screen Settings
- 43 Input Select Tab Screen
- 43 Input Screen Settings
- 44 Proc Amp Screen
- 45 SDI Output Screen
- 45 SDI Output Screen Settings
- 46 Analog Out Screen
- 46 Analog Out Screen Settings
- 47 Video Setup Screen
- 47 Setup Screen Settings
- 48 Audio Setup Screen
- 48 Audio Setup Screen Settings
- 49 Conversion Tab Screen
- 49 Conversion Tab Screen Settings
- 51 DS Keyer Screen
- 51 DS Keyer Screen Settings
- 52 Timecode Screen
- 52 Timecode Screen Settings
- 53 Timelapse Tab Screen
- 54 Info Screen
- 55 Saving Your Control Panel Presets
- 55 Who is Controlling KONA LHe?
- 56 QuickTime Application—1st Priority
- 56 Mac Desktop Video—2nd Priority
- 57 KONA Control Panel—3rd Priority
- 57 Control Recommendations
- 58 Using Multiple AJA Products
- 58 Notes on using multiple AJA Products
- 59 Easy Setups for Typical Uses
- 59 Easy Setups Menu
- 61 Easy Setups For Use With KONA LHe
- 61 Audio/Video Settings Menu
- 62 To Create A New Easy Setup
- 63 The Sequence Presets Window
- 69 Checking the System with a Simple Test Project of Bars and Tone
- 72 Using 8-bit Versus 10-bit Video
- 73 If You Run Into Problems
- 74 Updating Software
- 74 Support
- 75 Apple Resources