advertisement
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning intervention, always make sure you disconnected the power plug from the power socket.
Do not use water to clean the internal parts of the appliance; risk of electric shocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control a . Use a dry cloth to clean the appliance and the remote control.
b . It is possible to use a cloth moistened with cold water to clean the appliance in case it’s very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic surface.
4.1.b - Cleaning the filters
Operate as follows: a . Use a Phillips head screwdriver (not included) to remove the screws (22) (fig. N).
b . Press the two catches (25) to remove the air filter (9) from the body of the appliance (fig.O).
c . Remove the paper filter (10) from the body of the appliance.
d . Clean both filters (9 and 10) with water and neutral soap. Rinse the filters well with clean water.
e . If necessary, use a soft brush to clean the air filter more deeply (9).
EN - 20
PELER TOWER
advertisement