Program Playback/Random Playback. JVC SP-EXD1, EX-D1, GVT0143-008A

EX-D1[B].book Page 20 Wednesday, March 2, 2005 9:03 PM

Program Playback/Random Playback

Play the disc in the desired order

(Program Playback)

It is possible to program a maximum of 99 chapters or tracks. The same chapter or track can be programmed more than once.

1

While the disc is stopped, press

PLAY MODE repeatedly to display “PROGRAM” on the display window on the main unit.

TV screen

NOTE

Set the remote control mode selector to

AUDIO before using the number buttons.

Program screen

2

Create a program following the description on the TV screen.

Refer to “How to use the number buttons”

(page 15).

• The input content varies depending on the disc type.

• DVD VIDEO: Titles and chapters

• VCD, SVCD, CD: Tracks

• DVD AUDIO, MP3/WMA:

Groups and tracks

• To select a DVD AUDIO bonus group, carry out the operations of “Playing the Bonus

Group” on page 27 in advance to erase the display “BONUS”.

• If the input number of chapters or tracks is greater than 99, “MEM FULL” will be displayed.

• In the case of a VCD, SVCD or CD, when the total playback time reaches 9 hours 59 minutes 59 seconds, “--:--” will be displayed on the display window (it is possible to continue programming).

20

EX-D1[B].book Page 21 Wednesday, March 2, 2005 9:03 PM

To program on the display window on the main unit, operate as follows:

(1) Select a title/group using the number buttons.

(2) Designate a chapter/track number using the number buttons.

• Refer to “How to use the number buttons”

(page 15).

• The program number will be displayed on the lower display window (Ex.: “P2”).

(3) Repeat the above operations (1) and (2) to complete the program. Then, advance to

Step 3 .

NOTE

• The group/title number flashes on the display window after making each program step.

• Only for a DVD VIDEO, DVD AUDIO, VCD, or an

MP3/WMA: If you press

ENTER

instead of designating a track/chapter number, “ ALL ” is displayed and all of the tracks/chapters in the selected group/title are programmed.

3

Press DVD/CD

3

.

• To resume normal playback, press PLAY

MODE repeatedly to show the playback indication on the display window on the main unit while the disc is stopped. The program content will not be erased.

• The following operations erase the program content:

• Press CANCEL repeatedly (Programs will be erased one by one)

• Press 7 while the disc is stopped

• Open the disc tray

• Turn off the power

Advanced operations

Playing the disc in a random order

(Random Playback)

1

Press PLAY MODE repeatedly to display “RANDOM” on the display window on the main unit while the disc is stopped.

• “RANDOM” will also be displayed on the TV screen.

2

Press DVD/CD

3

.

• The same chapter or track will not be played twice.

• To resume normal playback, press PLAY

MODE repeatedly to show the playback indication on the display window on the main unit while the disc is stopped.

• Random Playback will also be canceled by carrying out the following operations:

• Open the disc tray

• Turn off the power

• The previous track will not be returned to even if

4 is pressed repeatedly during

Random Playback (the beginning of the current chapter or track will be returned to).

21