Changing the DISP (screen display) setting. Sony CYBER-SHOT DSC-HX1, DSC-HX1

Changing the DISP (screen display) setting

1 Press DISP (screen display) on the control button

2 Select the desired mode with the control button

Bright +

Image Only

Sets screen brighter and displays only images.

Bright +

Histogram

Bright

Sets screen brighter and displays a graph of the image brightness.

Image information is also displayed during playback.

Sets screen brighter and displays the information.

Normal Sets screen to standard brightness and displays the information.

Note

• If you view images in bright outside light, adjust the screen brightness up. However, the battery power may decrease faster under such condition.

18 GB

Histogram

A histogram is a graph showing the brightness of an image. The graph display indicates a bright image when skewed to the right side, and a dark image when skewed to the left side.

A Number of pixels

B Brightness

A

Dark

B

Bright

1 Press DISP (screen display) on the control button, then select [Bright +

Histogram]

Notes

• The histogram also appears when playing back a single-image, but you cannot adjust the exposure.

• The histogram does not appear when:

– Recording movies

– Playing back movies

– Viewing vertical orientation images

– Rotating still images

– Shooting with Sweep Panorama

– Viewing images shot with Sweep Panorama

– Viewing main images

• A large difference in the histogram displayed during shooting and playback may occur when:

– The flash strobes

– The shutter speed is slow or fast

• The histogram may not appear for images recorded using other cameras.

19 GB