Red Eye Reduction. Sony CYBER-SHOT DSC-HX1, DSC-HX1

Red Eye Reduction

The flash strobes two or more times before shooting to reduce the red-eye phenomenon when using the flash.

1 MENU t (Red Eye Reduction) t desired mode

(Auto)

(On)

(Off)

When the Face Detection function is activated, the flash strobes automatically to reduce the red-eye phenomenon.

The flash always strobes to reduce the red-eye phenomenon.

Does not use Red Eye Reduction.

Notes

• You cannot adjust the Red Eye Reduction when during Easy Shooting, Sweep Panorama, Hand-held

Twilight, Anti Motion Blur, Movie Mode, or when Smile Shutter is selected.

• To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second after you press the shutter button. Be also sure not to allow the subject to move during this period.

• Red Eye Reduction may not produce the desired effects. It depends on individual differences and conditions, such as distance to the subject, or if the subject looked away from the pre-strobe.

• If you do not use the Face Detection function, Red Eye Reduction does not work, even when you select

[Auto].

z

What causes the red-eye phenomenon?

Pupils become dilated in dark environments. Flash light is reflected off the blood vessels at the back of the eye (retina), causing the “red-eye” phenomenon.

Camera Eye

Retina

Other ways to reduce red-eye

• Select (High Sensitivity) mode in Scene Selection. (The flash is set to [Flash Off] automatically.)

• When the eyes of the subject turn out red, correct the image with [Retouch] t [Red Eye

Correction] on the viewing menu or with the supplied software “PMB”.

69 GB