Aperture Priority Shooting. Sony CYBER-SHOT DSC-HX1, DSC-HX1

Aperture Priority Shooting

You can manually adjust the amount of light that passes through the lens.

1 Set the mode dial to (Aperture Priority Shooting)

2 Press the jog dial

3 Turn the jog dial to select the aperture (F value)

You can select an aperture (F value) from F 2.8 to F 8.0.

The shutter speed is automatically adjusted from 1/2000 to 8 seconds.

You can set the EV or ISO setting with the jog dial.

4 Shoot with the shutter button

Aperture (F value)

Notes

• The flash is set to [Flash On], [Slow Synchro (Flash On)] or [Flash Off].

• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen flash when the shutter button is pressed halfway down. You can shoot in this condition, but we recommend that you adjust the flashing values again.

z

About the aperture priority

The lower the aperture (F value), the wider the hole that lets light pass through. The depth of focus decrease, and everything except objects within a narrow range of distance will be out of focus. This is good for portraits, etc.

The higher the aperture (F value), the smaller the hole that lets light pass through. Both objects relatively close and far away from the lens will appear sharp. This is good for landscapes, etc.

28 GB