advertisement
10 English
- Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and deformation of these parts.
Before first use
Disassemble, clean and disinfect all parts that come into contact with breast milk before you use the breast pump for the first time and after every use.
Fully charge the device before you use it for the first time or after a long period of non-use.
Cleaning and disinfecting
Overview
Clean and disinfect the parts that come into contact with the breast and breast milk as described below:
When How
Clean and disinfect before first use and after every use.
Disassemble all parts and then clean them as described in chapter
'Cleaning' and disinfect them as described in chapter 'Disinfecting'.
The following parts do not come into contact with the breast and breast milk; clean them as described below:
When How
Clean when needed.
Wipe with a clean, damp cloth with water and mild detergent.
English 11
Step 1: Disassembling
Make sure that you remove the white valve from the breast pump.
Step 2: Cleaning
The parts that come in contact with milk can be cleaned manually or in the dishwasher.
Warning: Do not use antibacterial or abrasive cleaning agents to clean the breast pump parts as this may cause damage.
Caution: Never put the motor unit or the adapter in water or in a dishwasher, as this causes permanent damage to these parts.
Caution: Be careful when you remove and clean the white valve. If it gets damaged, your breast pump does not function properly. To remove the white valve, gently pull at the ribbed tab on the side of the valve. To clean the white valve, rub it gently between your fingers in warm water with some dishwashing liquid. Do not insert objects into the white valve, as this may cause damage.
Step 2A: Manual cleaning
Supplies needed:
- Mild dishwashing liquid
- Drinking-quality water
- Soft, clean brush
- Clean tea towel or drying rack
- Clean sink or bowl
5 min.
1. Rinse all parts under a running tap with lukewarm water.
2. Soak all parts for
5 minutes in warm water with some mild dishwashing liquid.
3. Clean all parts with a cleaning brush.
4. Thoroughly rinse all parts under a running tap with drinking-quality water.
12 English
5. Leave all parts to airdry on a clean tea towel or drying rack.
Step 2B: Cleaning in the dishwasher
Supplies needed:
- Mild dishwashing liquid or a dishwashing tablet
- Drinking-quality water
Note: Food colorings may discolor parts.
1. Place all parts on the top rack of the dishwasher.
2. Put dishwashing liquid or a tablet in the machine and run a standard program.
3. Leave all parts to airdry on a clean tea towel or drying rack.
Step 3: Disinfecting
Supplies needed:
- A household pot
- Drinking-quality water
Caution: During disinfection with boiling water, prevent the bottle or other parts from touching the side of the pan. This can cause irreversible product deformation or damage that Philips cannot be held liable for.
advertisement
Related manuals
advertisement