advertisement
Printing Network Settings
Use the operation panel to print the printer's current network settings.
Important
• The network settings printout contains important information about your network. Handle it with care.
1.
Check that printer is turned on.
If the HOME screen is not displayed, tap the HOME button.
2.
Load three sheets of A4 or Letter-sized plain paper.
3.
Select ( Setup ) on HOME screen.
Note
• If User management settings is enabled, the user selection screen is displayed before the
HOME screen is displayed.
4.
Select Device settings .
5.
Select LAN settings .
6.
Select Print details .
7.
Check message and select Yes .
1-1
1-2
1-3
2
2-1
8.
When the confirmation screen for printing passwords appears, select ON or OFF .
The printer starts printing the network setting information.
The following information on the printer's network setting is printed out. (Some setting values are not displayed depending on the printer settings.)
Item Number
Item Description Setting
1 Product Information Product information –
Product Name
ROM Version
Serial Number
Network Diagnostics
Diagnostic Result
Product name
ROM version
Serial number
Network diagnostics
Diagnostic result
XXXXXXXX
XXXXXXXX
XXXXXXXX
–
XXXXXXXX
41
3-2-4
3-2-5
3-2-6
3-2-7
3-2-8
3-2-9
3-2-10
3-2-11
3-2-12
2-2
2-3
3
3-2
3-2-1
3-2-2
3-2-3
3-2-13
3-2-14
3-2-15
3-2-16
3-2-17
3-2-18
3-2-19
3-2-20
3-2-21
Result Codes
Result Code Details
Wireless LAN
Infrastructure
Signal Strength
Link Quality
Frequency
MAC Address
Connection
SSID
Channel
Encryption
WEP Key Length
Authentication
TCP/IPv4
IP Address
Subnet Mask
Default Gateway
TCP/IPv6
Link Local Address
Result codes
Result code details
Wireless LAN
Infrastructure
Signal strength
Link quality
Frequency
XXXXXXXX http://canon.com/ijnwt
Enable/Disable
Enable/Disable
0 to 100 [%]
0 to 100 [%]
XX (GHz)
MAC address
Connection status
SSID
Channel
Encryption method
XX:XX:XX:XX:XX:XX
Active/Inactive
Wireless LAN network name (SSID)
XXX (1 to 13)
None/WEP/TKIP/AES
WEP key length (bits) Inactive/128/64
Authentication method None/auto/open/shared/WPA-PSK/WPA2-PSK
TCP/IPv4
IP address
Enable/Disable
XXX.XXX.XXX.XXX
Subnet mask
Default gateway
TCP/IPv6
Link local address
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
Enable/Disable
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Link local prefix length XXX Link Local Prefix
Length
Stateless Address1
Stateless Prefix
Length1
Stateless Address2
Stateless Prefix
Length2
Stateless address 1 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless prefix length
1
XXX
Stateless address 2 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless prefix length
2
XXX
42
3-2-23
3-2-24
3-2-33
3-2-34
3-2-35
3-3
3-2-22
3-2-25
3-2-26
3-2-27
3-2-28
3-2-29
3-3-5
3-3-6
3-3-7
3-3-8
3-3-1
3-3-2
3-3-3
3-3-4
3-3-9
3-3-10
MAC Address
Connection
SSID
Password
Channel
Encryption
Authentication
TCP/IPv4
IP Address
Subnet Mask
Stateless Address3
Stateless Prefix
Length3
Stateless Address4
Stateless Prefix
Length4
Default Gateway1
Default Gateway2
Default Gateway3
Default Gateway4
IPsec
Security Protocol
Wireless LAN DRX
Wireless Direct
Stateless address 3 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless prefix length
3
XXX
Stateless address 4
Stateless prefix length
4
XXX
Default gateway 1
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default gateway 2
Default gateway 3
Default gateway 4
IPsec setting
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Active/Inactive
Security method
Discontinuous reception (wireless LAN)
Operation mode for
Wireless Direct
ESP/ESP & AH/AH/Blank (Not selected)
Enable/Disable
Enable/Disable
MAC address
Connection status
SSID
Password
XX:XX:XX:XX:XX:XX
Active/Inactive
Wireless Direct network name (SSID)
Wireless Direct password
Channel
Encryption method
3
AES
Authentication method WPA2-PSK
TCP/IPv4 Enable/Disable
IP address
Subnet mask
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
43
3-3-11
3-3-12
3-3-13
3-3-14
3-3-15
3-3-16
3-3-17
4
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
4-14
Default Gateway
TCP/IPv6
Link Local Address
Wired LAN
MAC Address
Connection
TCP/IPv4
IP Address
Subnet Mask
Default Gateway
TCP/IPv6
Link Local Address
Default gateway
TCP/IPv6
Link local address
XXX.XXX.XXX.XXX
Enable/Disable
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Link local prefix length XXX Link Local Prefix
Length
IPsec
Security Protocol
Wireless LAN DRX
IPsec setting
Security method
Discontinuous reception (wireless direct)
Wired LAN
MAC address
Active/Inactive
ESP/ESP & AH/AH/Blank (Not selected)
Enable/Disable
Enable/Disable
XX:XX:XX:XX:XX:XX
Wired LAN status
TCP/IPv4
IP address
Subnet mask
Default gateway
Active/Inactive
Enable/Disable
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
TCP/IPv6
Link local address
Enable/Disable
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Link local prefix length XXX Link Local Prefix
Length
Stateless Address1
Stateless Prefix
Length1
Stateless Address2
Stateless Prefix
Length2
Stateless Address3
Stateless address 1
Stateless prefix length
1
XXX
Stateless address 2
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless prefix length
2
XXX
Stateless address 3 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
44
4-15
4-16
4-17
4-18
4-19
4-20
4-21
5-4
5-5
5-6
5-7
5-9
5-10
5-11
5-12
5-14
5-15
5
5-1
5-2
4-25
4-26
4-27
Stateless Prefix
Length3
Stateless Address4
Stateless Prefix
Length4
Default Gateway1
Default Gateway2
Default Gateway3
Default Gateway4
Stateless prefix length
3
XXX
Stateless address 4 XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Stateless prefix length
4
XXX
Default gateway 1
Default gateway 2
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Default gateway 3
Default gateway 4
IPsec setting
Security method
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
Active/Inactive
ESP/ESP & AH/AH/Blank (Not selected)
IPsec
Security Protocol
Wired LAN DRX
Other Settings
Printer Name
Wireless Direct Dev-
Name
WSD Printing
WSD Timeout
LPD Printing
Discontinuous reception (wired LAN)
Other settings
Printer name
Device name for wireless direct
WSD printing setting
Timeout
LPD printing setting
Enable/Disable
–
Printer name (Up to 15 alphanumeric characters)
Device name for wireless direct (Up to 32 alphanumeric characters)
Enable/Disable
1/5/10/15/20 [min]
Enable/Disable
RAW Printing
Bonjour
RAW printing setting
Bonjour setting
Enable/Disable
Enable/Disable
Bonjour Service Name Bonjour service name Bonjour service name (Up to 52 alphanumeric characters)
LLMNR LLMNR setting Enable/Disable
SNMP
DNS Server
Primary Server
SNMP setting Enable/Disable
Obtain DNS server address automatically
Auto/Manual
Primary server address XXX.XXX.XXX.XXX
45
5-17
5-18
5-19
5-20
5-16
5-21
Secondary Server
Proxy Server
Secondary server address
Proxy server setting
XXX.XXX.XXX.XXX
Enable/Disable
Proxy Address
Proxy Port
Cert. Fingerprt(SHA-1) Certificate fingerprint(SHA-1)
Cert. Fingerprt(SHA-256)
Proxy address
Certificate fingerprint(SHA-256)
XXXXXXXXXXXXXXXXXXXX
Proxy port specification 1 to 65535 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
("XX" represents alphanumeric characters.)
46
advertisement
Key Features
- Fast print speeds of up to 24 ipm in black and 15.5 ipm in color
- High-capacity ink tanks for low running costs
- Exceptional print quality with a maximum resolution of 4800 x 1200 dpi
- Versatile paper handling options, including a 500-sheet paper cassette
- Automatic duplex printing for two-sided printing
- Wi-Fi and Ethernet connectivity for easy sharing
- Mobile printing support for printing from smartphones and tablets