Basic Printing Setup. Canon MAXIFY GX6020

Basic Printing Setup

This section describes settings on the Quick Setup tab used for basic printing.

Basic Printing Setup

1.

Check that printer is turned on

2.

Load paper

in printer

3.

Open printer driver's setup screen

4.

Select frequently used settings

On the Quick Setup tab, use Commonly Used Settings to select from predefined print settings.

When you select a print setting, the settings for Additional Features , Media Type , and Printer Paper

Size automatically switch to the predefined values.

5.

Select print quality

For Print Quality , select from High , Standard , or Economy .

248

Important

• The print quality selections will differ depending on which print setting you select.

Note

• Selecting Economy in Print Quality reduces ink consumption. This means that you can print more than if you have Standard selected.

For details on Economy Mode, see " Economy Mode ."

6.

Select paper source

For Paper Source , select Automatically Select , Rear Tray , or Cassette , whichever matches your purpose.

249

Important

• The paper source settings that can be selected may differ depending on the paper type and size.

7.

Click OK

The printer will now print using these settings.

Important

• If you are performing large-format printing, make sure that there is plenty of remaining ink.

• When you select Always Print with Current Settings , the settings on the Quick Setup , Main , and

Page Setup tabs are saved, and those settings are used in subsequent printings.

• To register the current settings

as a new preset, click Save...

under Commonly Used Settings .

Note

• If the paper settings in the printer driver differ from the paper information registered on the printer, an error may occur. For instructions on what to do if an error occurs, see "

Paper Settings ."

To check the current printer settings or to apply the printer settings to the printer driver, display the

Quick Setup tab, click Printer Media Information...

, and specify the settings in the dialog box that appears.

For details about the paper information to be registered on the printer, see the following:

Paper Settings on the Printer Driver and the Printer (Media Type)

Paper Settings on the Printer Driver and the Printer (Paper Size)

Checking Printer Settings and Applying Settings to Printer Driver

1.

Open printer driver setup window

250

2.

On Quick Setup tab, click Printer Media Information...

The Printer Media Information dialog box appears.

3.

Select Paper Source

From Paper Source , check the setting or select a new paper source.

The current printer settings appear in Media Type and Page Size .

4.

Apply settings

To apply the printer settings to the printer driver, click Set .

Note

• If the media type in Feed settings on the printer is set to Ink Jet Hagaki , Hagaki K , or Hagaki , or if the paper size is set to 2L/5"x7"(13x18) , click Set to display the dialog box.

Select the media type and paper size that match your purpose, and then click OK .

• If the media type or the paper size on the printer are not set or are set to Others , Set will be grayed out and cannot be clicked.

• If communication with the printer is disabled, the Printer Media Information...

dialog box will not appear or the printer driver will not be able to obtain printer media information.

251