advertisement
![Oven controls. Miele H 5061 B, H 5361 B, H 5461 B, H 5051 B | Manualzz Oven controls. Miele H 5061 B, H 5361 B, H 5461 B, H 5051 B | Manualzz](http://s3.manualzz.com/store/data/059523987_1-aa70ef8a6cbc94a5a0c272ab17af3c88-360x466.png)
Features
Oven controls
In addition to operating the various cooking programmes to bake, roast and grill, the controls also offer the following:
– a time of day display,
– a minute minder,
– a timer for programming cooking durations,
– automatic programmes,
– settings that can be customised.
Cooling system
A cooling fan will come on automatically when a cooking programme is started. The cooling fan mixes hot air from the oven cavity with cool room air before venting it out into the kitchen through vents located between the appliance door and the control panel.
The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or on the oven housing unit.
Safety features
System lock
The system lock 0 prevents the oven from being used unintentionally by children, for example. See "Settings -
Safety".
Safety switch-off
Safety switch-off is triggered automatically if the oven is operated for an unusually long period of time. The period of time will depend on the oven function selected.
Vented oven door
The oven door is an open system and some of the door panes have a heatreflecting coating. During operation, cool air is passed through the oven door to keep the outer pane cool.
If necessary, the oven door can be dismantled for cleaning.
See "Cleaning and care" for more information.
13
advertisement
Related manuals
advertisement
Table of contents
- 12 H 5051 B, H 5061 B
- 13 Oven controls
- 13 Safety features
- 13 System lock
- 13 Safety switch-off
- 13 Cooling system
- 13 Vented oven door
- 14 Energy saving features
- 15 User instructions
- 15 Moisture plus
- 15 "Moisture plus" recipe booklet
- 15 PerfectClean treated surfaces
- 15 Catalytic enamelled surfaces
- 16 Energy efficiency rating according to EN
- 16 Accessories
- 16 Baking tray, universal tray and rack with non-tip notches
- 17 Anti-splash insert (depending on model)
- 17 Handle (depending on model)
- 17 Food probe
- 17 Descaling tablets, plastic tube with clip
- 18 Function selector
- 19 Temperature selector
- 19 Sensors
- 19 Keypad tone
- 20 Display
- 28 To select a function
- 28 Selecting a temperature
- 28 Recommended temperatures
- 28 To change the temperature
- 29 Heating-up phase
- 29 Pre-heating the oven
- 30 Entering the Duration, a Start time or Finish time
- 30 To enter the time
- 31 To use Automatic switch-off
- 31 Delaying the start with Automatic switch-off
- 32 Sequence of the cooking programme when using Automatic switch-off
- 32 Changing or deleting an entered cooking time
- 33 Activating moisture reduction
- 34 Automatic programmes
- 35 Number of bursts of steam and when they are injected
- 37 Evaporate residual moisture
- 37 The residual moisture evaporation process
- 37 To start the residual moisture evaporation process
- 38 To cancel the residual moisture evaporation process
- 38 Descaling
- 41 Display
- 41 Clock format
- 41 To set the time of day
- 42 Lighting
- 42 Catalyser
- 42 Cooling fan run-on
- 43 Heating phase
- 43 Recommended temperatures
- 43 Display
- 43 Contrast
- 43 Brightness
- 43 Volume
- 43 Buzzer tones
- 44 Keypad tone
- 44 Frequency
- 44 Safety
- 44 To switch off the safety lock for one cooking programme
- 45 Temperature format
- 45 Showroom programme
- 45 To switch the demo programme off
- 45 Factory default
- 46 Appliance front
- 47 Accessories
- 47 Baking tray, universal tray, anti-splash insert (if applicable)
- 47 Rack, runners
- 47 Food probe
- 47 Oven interior
- 48 Seal and inside of the oven door
- 49 PerfectClean
- 51 Catalytic enamel surfaces
- 52 To remove the oven door
- 53 To dismantle the oven door
- 56 To refit the door
- 57 To remove the runners
- 57 To remove the catalytic enamelled back panel and roof liner
- 57 Back panel
- 58 Roof liner
- 59 When to run the descaling programme
- 59 Descaling process (overview)
- 60 Preparation
- 69 Appliance dimensions and unit cut-out
- 70 Front dimensions