To cancel the residual moisture evaporation process. Miele H 5061 B, H 5361 B, H 5461 B, H 5051 B

Moisture plus

To cancel the residual moisture evaporation process

If you select "Moisture plus" or one of the Automatic programmes with

Moisture plus, the prompt to evaporate residual moisture will appear.

^

Touch the

; oder

?

for at least 3 seconds.

The evaporation process will be cancelled.

^

The cooking programme can now be started.

Do not cancel the prompt for residual moisture evaporation too often, as this might cause the steam unit to overflow when taking in more water.

Descaling

The oven will need to be descaled depending on the number of cooking programmes using Moisture plus which have been run and the amount of water taken into the oven for these. A message to tell you to descale the appliance will appear in the display.

The steam injection system should be descaled regularly. How often this needs to be done will depend on the water hardness level in your area.

You can start the descaling process at any time by selecting the Moisture plus function and then "Descale".

You cannot use the oven until you have carried out the descaling process.

See "Cleaning and care" for more information about descaling.

38

Minute minder

The minute minder can be used to time any activity in the kitchen, e.g. boiling eggs.

You can enter a time of up to a maximum of 9 hours and 59 minutes.

You can set the minute minder at the same time as another timed programme, e.g. as a reminder to stir a dish or add seasoning etc.

The time counts down in the display.

At the end of the time set for the minute minder

– the

N symbol will flash.

– A signal will sound (provided this is activated - see "Settings - Volume -

Buzzer tones").

– the display will show the time counting upwards.

^ Touch the N sensor.

With "Moisture plus d ":

It is a good idea to use the minute minder to remind you when to release the bursts of steam manually.

To set the minute minder

^ Touch the N sensor.

^

"0 : 00 : 00 h : min : sec" comes up in the display.

The hour is highlighted.

^ Use the ; or ?

sensors to first select the hour, and confirm your selection with the OK sensor.

After setting the hour, the minutes will be highlighted.

^

Now use the

; or

?

sensors to select the minutes, and confirm your selection with the OK sensor.

After setting the minutes, the seconds will be highlighted.

^

Finally, use the

; or

?

sensors to select the seconds, and confirm your selection with the OK sensor.

To alter the time set for the minute minder:

^

Touch the

N sensor.

^ Use the ?

sensor to scroll the minute minder through to "- : - - : - -", and then set the hour, minutes and seconds, confirming each entry with

OK.

To cancel the time set for the minute minder

^ Touch the N sensor.

^ Use the ?

sensor to scroll the minute minder through to "- : - - : - -".

^

Touch the OK sensor.

39

Settings

Your appliance is supplied with a number of standard default settings.

Settings cannot be altered while a cooking programme is in progress.

To change a setting:

^ Select " % Settings".

The list of options will show in the display.

– Language J

– Time

– Lighting

– Catalyser

– Cooling fan run-on

– Heating phase

– Recommended temperatures

– Boost

– Display

– Volume

– Safety

– Temperature format

– Showroom programme

– Factory default

^ Select the setting that you want to change by touching the

; oder

?

sensor, and confirm with OK.

^ Use the ; or ?

sensor to select the setting you want and confirm with the

OK sensor.

Settings which are currently selected are marked with a

L

.

If you do not make another selection within approx. 15 seconds after selecting a setting, the display will return to the Settings list.

Language

J

You can set the language you want the display to appear in.

After selecting and confirming

"Language", the language you have selected will appear in the display.

If you have selected the wrong language by mistake, you can follow the flag symbol J to get back to the

Language J menu.

40