advertisement
![Keypad tone. Miele H 5061 B, H 5361 B, H 5461 B, H 5051 B | Manualzz Keypad tone. Miele H 5061 B, H 5361 B, H 5461 B, H 5051 B | Manualzz](http://s3.manualzz.com/store/data/059523987_1-aa70ef8a6cbc94a5a0c272ab17af3c88-360x466.png)
Settings
Keypad tone
The keypad tone is represented by a bar with seven segments, where one segment is filled in.
Factory default:
NH H H KKKKK H H QN
To change the setting, move the solid segment to the left or right with the ?
or
; sensor.
If none of the segments is filled in, the keypad tone is switched off.
Frequency
The frequency of the buzzer can be changed. Changing the frequency may be necessary to optimise the volume in different installation environments.
The frequency level is represented by a bar with seven segments, where one segment is filled in. Each segment represents a different frequency.
Factory default:
P G G G G G G G G G G G G G GM
To change the setting, move the solid segment to the left or right with the ; or
?
sensor.
If the solid segment is on the far left of the display (factory default), a brief signal will sound after a short while four times at 15 second intervals.
If another segment is blocked out, a continual signal will sound after a short while for approx. 5 minutes on the frequency set.
Safety
System lock 0
The system lock prevents the appliance being switched on unintentionally, by children for example.
– Off
(Factory default)
The lock is deactivated, and the oven can be used.
– On
The oven is locked and cannot be operated.
When the oven is switched off, 0 appears in the display.
However, the minute minder N can still be used.
The system lock remains activated after a power cut.
To switch off the safety lock for one cooking programme
^
Select an oven function.
The system lock symbol will appear in the display.
^ Touch the OK sensor for 3 seconds.
The symbol will switch off, and the oven is ready for use.
44
advertisement
Related manuals
advertisement
Table of contents
- 12 H 5051 B, H 5061 B
- 13 Oven controls
- 13 Safety features
- 13 System lock
- 13 Safety switch-off
- 13 Cooling system
- 13 Vented oven door
- 14 Energy saving features
- 15 User instructions
- 15 Moisture plus
- 15 "Moisture plus" recipe booklet
- 15 PerfectClean treated surfaces
- 15 Catalytic enamelled surfaces
- 16 Energy efficiency rating according to EN
- 16 Accessories
- 16 Baking tray, universal tray and rack with non-tip notches
- 17 Anti-splash insert (depending on model)
- 17 Handle (depending on model)
- 17 Food probe
- 17 Descaling tablets, plastic tube with clip
- 18 Function selector
- 19 Temperature selector
- 19 Sensors
- 19 Keypad tone
- 20 Display
- 28 To select a function
- 28 Selecting a temperature
- 28 Recommended temperatures
- 28 To change the temperature
- 29 Heating-up phase
- 29 Pre-heating the oven
- 30 Entering the Duration, a Start time or Finish time
- 30 To enter the time
- 31 To use Automatic switch-off
- 31 Delaying the start with Automatic switch-off
- 32 Sequence of the cooking programme when using Automatic switch-off
- 32 Changing or deleting an entered cooking time
- 33 Activating moisture reduction
- 34 Automatic programmes
- 35 Number of bursts of steam and when they are injected
- 37 Evaporate residual moisture
- 37 The residual moisture evaporation process
- 37 To start the residual moisture evaporation process
- 38 To cancel the residual moisture evaporation process
- 38 Descaling
- 41 Display
- 41 Clock format
- 41 To set the time of day
- 42 Lighting
- 42 Catalyser
- 42 Cooling fan run-on
- 43 Heating phase
- 43 Recommended temperatures
- 43 Display
- 43 Contrast
- 43 Brightness
- 43 Volume
- 43 Buzzer tones
- 44 Keypad tone
- 44 Frequency
- 44 Safety
- 44 To switch off the safety lock for one cooking programme
- 45 Temperature format
- 45 Showroom programme
- 45 To switch the demo programme off
- 45 Factory default
- 46 Appliance front
- 47 Accessories
- 47 Baking tray, universal tray, anti-splash insert (if applicable)
- 47 Rack, runners
- 47 Food probe
- 47 Oven interior
- 48 Seal and inside of the oven door
- 49 PerfectClean
- 51 Catalytic enamel surfaces
- 52 To remove the oven door
- 53 To dismantle the oven door
- 56 To refit the door
- 57 To remove the runners
- 57 To remove the catalytic enamelled back panel and roof liner
- 57 Back panel
- 58 Roof liner
- 59 When to run the descaling programme
- 59 Descaling process (overview)
- 60 Preparation
- 69 Appliance dimensions and unit cut-out
- 70 Front dimensions