advertisement
More about manual operation
Selecting a temperature
Automatic switch-off can be selected when operating the oven manually.
You can also adjust the heat-up phase and the humidity level inside the oven.
To select a function
^
Select the required function.
The function and recommended temperature are displayed.
^ Touch the "OK" sensor.
Options which can be entered or changed will now appear in the display:
– Duration
– Start time
– Finish
– Moisture reduction
– Core temp.
(This only appears when the food probe is being used; see "Food probe" in the separate User instructions supplied with the oven).
Recommended temperatures
As soon as a cooking function is selected, the recommended temperature will appear in the display.
Function
U Fan plus
O Intensive bake
V
Conventional heat
X
Bottom heat
\
Fan grill
Y Full grill
Z Economy grill
P Defrost
[ Auto roast* d Moisture plus
Recommended temperature
160 °C
170 °C
180 °C
190 °C
200 °C
240 °C
240 °C
25 °C
160 °C
160 °C
* Initial searing phase temperature approx. 230 °C, then drops to 160 °C for continued roasting
To change the temperature
If the recommended temperature is not suitable, you can use the temperature selector to change it.
As soon as you turn the temperature selector, the temperature range for that function will appear in the display. The temperature can be changed in increments of 5 °.
You can also change the recommended temperature for a function permanently if you wish, see
"Settings - Recommended temperatures".
28
advertisement
Related manuals
advertisement
Table of contents
- 12 H 5051 B, H 5061 B
- 13 Oven controls
- 13 Safety features
- 13 System lock
- 13 Safety switch-off
- 13 Cooling system
- 13 Vented oven door
- 14 Energy saving features
- 15 User instructions
- 15 Moisture plus
- 15 "Moisture plus" recipe booklet
- 15 PerfectClean treated surfaces
- 15 Catalytic enamelled surfaces
- 16 Energy efficiency rating according to EN
- 16 Accessories
- 16 Baking tray, universal tray and rack with non-tip notches
- 17 Anti-splash insert (depending on model)
- 17 Handle (depending on model)
- 17 Food probe
- 17 Descaling tablets, plastic tube with clip
- 18 Function selector
- 19 Temperature selector
- 19 Sensors
- 19 Keypad tone
- 20 Display
- 28 To select a function
- 28 Selecting a temperature
- 28 Recommended temperatures
- 28 To change the temperature
- 29 Heating-up phase
- 29 Pre-heating the oven
- 30 Entering the Duration, a Start time or Finish time
- 30 To enter the time
- 31 To use Automatic switch-off
- 31 Delaying the start with Automatic switch-off
- 32 Sequence of the cooking programme when using Automatic switch-off
- 32 Changing or deleting an entered cooking time
- 33 Activating moisture reduction
- 34 Automatic programmes
- 35 Number of bursts of steam and when they are injected
- 37 Evaporate residual moisture
- 37 The residual moisture evaporation process
- 37 To start the residual moisture evaporation process
- 38 To cancel the residual moisture evaporation process
- 38 Descaling
- 41 Display
- 41 Clock format
- 41 To set the time of day
- 42 Lighting
- 42 Catalyser
- 42 Cooling fan run-on
- 43 Heating phase
- 43 Recommended temperatures
- 43 Display
- 43 Contrast
- 43 Brightness
- 43 Volume
- 43 Buzzer tones
- 44 Keypad tone
- 44 Frequency
- 44 Safety
- 44 To switch off the safety lock for one cooking programme
- 45 Temperature format
- 45 Showroom programme
- 45 To switch the demo programme off
- 45 Factory default
- 46 Appliance front
- 47 Accessories
- 47 Baking tray, universal tray, anti-splash insert (if applicable)
- 47 Rack, runners
- 47 Food probe
- 47 Oven interior
- 48 Seal and inside of the oven door
- 49 PerfectClean
- 51 Catalytic enamel surfaces
- 52 To remove the oven door
- 53 To dismantle the oven door
- 56 To refit the door
- 57 To remove the runners
- 57 To remove the catalytic enamelled back panel and roof liner
- 57 Back panel
- 58 Roof liner
- 59 When to run the descaling programme
- 59 Descaling process (overview)
- 60 Preparation
- 69 Appliance dimensions and unit cut-out
- 70 Front dimensions