4.10.5 DDM. Advantech EKI-7710G-2CI, EKI-7710E-2C, EKI-7710G-2CPI, EKI-7710G-2CP

4.10.4.3

System Log Server

The System Log Server page allows you to configure the log server.

To access this page, click

Diagnostics

>

System Log

>

System Log Server

.

Figure 4.112 Diagnostics > System Log > System Log Server

The following table describes the items in the previous figure.

Item

Server Address

Server Port

Severity

Facility

Description

Enter the IP address of the log server.

Enter the Udp port number of the log server.

Click the drop-down menu to select the severity level for local log messages. The default is emerg.

The level options are:

 emerg: Indicates system is unusable. It is the highest level of severity

 alert: Indicates action must be taken immediately

 crit: Indicates critical conditions

 error: Indicates error conditions

 warning: Indicates warning conditions

 notice: Indicates normal but significant conditions

 info: Indicates informational messages

 debug: Indicates debug-level messages

Click the drop-down menu to select facility to which the message refers.

Click

Apply

to save the values and update the screen.

Apply

The ensuing table for

Remote Logging Setting Status

settings are informational only: Status, Server Info, Severity, Facility and

Delete

(click to delete the desired server address).

4.10.5

DDM

The DDM page allows you to setup the diagnostic alarm status.

To access this page, click

Diagnostics

>

DDM

.

Figure 4.113 Diagnostics > DDM

112 EKI-7710 Series User Manual