4.11.2 Backup Manager. Advantech EKI-7710G-2CI, EKI-7710E-2C, EKI-7710G-2CPI, EKI-7710G-2CP
Add to My manuals156 Pages
advertisement
To access this page, click
Tools
>
IXM
.
Figure 4.115 Tools > IXM
The following table describes the items in the previous figure.
Item
Search Field
#
Device Name
Device Model
Category
IP Address
MAC Address
Firmware Version
Previous
Next
Description
Enter criteria to search the IXM information.
Displays the reference to the device number.
Displays the device name.
Displays the device model type.
Displays the device’s category type.
Displays the device’s IP address.
Displays the device’s IP MAC address.
Displays the device’s firmware version.
Click
Previous
to back to previous page.
Click
Next
to go to next page.
4.11.2
Backup Manager
The Backup Manager page allows you to configure a remote TFTP sever or host file system in order to backup the firmware image or configuration file.
To access this page, click
Tools
>
Backup Manager
.
Figure 4.116 Tools > Backup Manager
114 EKI-7710 Series User Manual
advertisement
Related manuals
advertisement
Table of contents
- 15 Supported Models
- 15 Specifications
- 17 Hardware Views
- 17 1.3.1 Front View
- 21 1.3.2 Rear View
- 22 1.3.3 Top View
- 24 Installation Guidelines
- 24 2.1.1 Connecting Hardware
- 24 Verifying Switch Operation
- 25 Installing the Switch
- 25 2.3.1 DIN Rail Mounting
- 26 2.3.2 Wall-Mounting
- 29 Installing and Removing SFP Modules
- 29 2.4.1 Installing SFP Modules
- 31 2.4.2 Removing SFP Modules
- 32 Connecting the Switch to Ethernet Ports
- 32 2.5.1 RJ45 Ethernet Cable Wiring
- 33 Connecting the Switch to Console Port
- 34 Power Supply Installation
- 34 2.7.1 Overview
- 34 2.7.2 Considerations
- 35 2.7.3 Grounding the Device
- 36 2.7.4 Wiring a Relay Contact
- 37 2.7.5 Wiring the Power Inputs
- 39 Reset Button
- 41 First Time Setup
- 41 3.1.1 Overview
- 41 3.1.2 Introduction
- 41 3.1.3 Administrative Interface Access
- 42 3.1.4 Using the Graphical (Web) Interface
- 42 3.1.5 Configuring the Switch for Network Access
- 43 3.1.6 Configuring the Ethernet Ports
- 43 Command Line Interface Configuration
- 43 3.2.1 Introduction to Command-Line Interface (CLI)
- 44 3.2.2 Accessing the CLI
- 44 Web Browser Configuration
- 44 3.3.1 Preparing for Web Configuration
- 44 3.3.2 System Login
- 47 Log In
- 47 Recommended Practices
- 47 4.2.1 Changing Default Password
- 48 Monitoring
- 48 4.3.1 Device Information
- 49 4.3.2 Logging Message
- 50 4.3.3 Port Monitoring
- 51 4.3.4 Link Aggregation
- 51 4.3.5 LLDP Statistics
- 52 4.3.6 IGMP Statistics
- 53 System
- 53 4.4.1 IP Settings
- 54 4.4.2 DHCP Client Option
- 55 4.4.3 DHCP Auto Provision
- 55 4.4.4 IPv6 Settings
- 56 4.4.5 Management VLAN
- 57 4.4.6 System Time
- 58 L2 Switching
- 58 4.5.1 Port Configuration
- 59 4.5.2 Port Mirror
- 59 4.5.3 Link Aggregation
- 62 4.5.4 802.1Q VLAN
- 66 4.5.5 Q-in-Q
- 67 4.5.6 GARP
- 68 4.5.7 802.3az EEE
- 69 4.5.8 Multicast
- 74 4.5.9 Jumbo Frame
- 74 4.5.10 Spanning Tree
- 79 4.5.11 X-Ring Elite
- 80 4.5.12 X-Ring Pro
- 81 4.5.13 Loopback Detection
- 82 MAC Address Table
- 82 4.6.1 Static MAC
- 83 4.6.2 MAC Aging Time
- 84 4.6.3 Dynamic Forwarding Table
- 84 Security
- 84 4.7.1 Storm Control
- 86 4.7.2 Port Security
- 87 4.7.3 Protected Ports
- 87 4.7.4 DoS Prevention
- 90 4.7.5 Applications
- 92 4.7.6 802.1x
- 93 4.7.7 IP Security
- 94 4.8.1 General
- 99 4.8.2 QoS Basic Mode
- 100 4.8.3 Rate Limit
- 102 Management
- 102 4.9.1 LLDP
- 106 4.9.2 SNMP
- 109 4.9.3 Power Over Ethernet
- 110 4.9.4 TCP Modbus
- 111 4.9.5 DHCP Server
- 115 4.9.6 SMTP Client
- 117 4.9.7 RMON
- 120 Diagnostics
- 120 4.10.1 Cable Diagnostics
- 121 4.10.2 Ping Test
- 122 4.10.3 IPv6 Ping Test
- 123 4.10.4 System Log
- 125 4.10.5 DDM
- 126 Tools
- 126 4.11.1 IXM
- 127 4.11.2 Backup Manager
- 128 4.11.3 Upgrade Manager
- 128 4.11.4 Dual Image
- 129 4.11.5 Save Configuration
- 129 4.11.6 User Account
- 130 4.11.7 Reset System
- 130 4.11.8 Reboot Device
- 130 Modbus/TCP Mapping
- 130 4.12.1 Modbus/TCP Mapping Table
- 155 Troubleshooting