Cassette tape playback. RCA 27F501TDV

Cassette tape playback

Preparation:

• Press TV/VCR to select the TV/VCR mode.

1

Load a prerecorded tape

(When loading a cassette tape without the erase prevention tab, playback will start automatically).

2

To start playback

Press PLAY.

Playback will start.

" " will appear on the screen for about 4 seconds.

To stop playback

Press STOP once.

The tape will stop but remain fully loaded and ready to play.

" " will appear on the screen for about 4 seconds.

To rewind the tape or forward it rapidly

Stop the playback or recording with STOP.

To rewind the tape:

Press REW.

To forward the tape:

Press F.FWD.

NOTES:

• This TV/VCR/DVD selects the playback tape speed SP or SLP automatically.

• If you play a prerecorded tape after the DVD playback, you must set the

TV/VCR/DVD to TV/VCR mode using

TV/VCR.

• When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after

5 minutes it will change to the stop mode automatically.

To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY.

Forward/Reverse picture search mode

When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REW or F.FWD and hold it down. The TV/VCR/DVD will resume the tape winding as soon as the button is released.

35

5L00101AE(32-35) 35 2/25/04, 3:09 PM