advertisement
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.
NOTES:
• If the T.REC indicator blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape supply.
Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR operation cannot be used. To use the VCR operation, press TIMER
REC to deactivate the timer. After you use the VCR, press TIMER REC again to put the VCR into timer recording standby mode.
•
•
If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER
REC again within the programmed time, the recording operation will start again.
After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost upon resumption of power.
In this case, reset the clock (see pages
16-18) and reprogram any timer recordings.
Timer recording
•
•
•
Preparation:
Press TV/VCR to select the TV/VCR mode.
Load a cassette tape with the erase prevention tab intact.
Press DISPLAY/CALL to verify that the time and date are correct (see pa ge 39 ).
Example: Program a timer recording for the 23rd day, channel 125
(CABLE), 7:00 - 9:30 PM on timer program number 1 (Tape speed: SLP).
1
Press TV MENU. Press or to select option.
TIMER REC SET
AUTO REPEAT ON
2
Press or to select “TIMER REC
SET”, then press .
/ / / / MENU
TIMER REC SET
AUTO REPEAT
CH
ON
/ / / MENU
3
Press or to select one of the program line, then press ENTER.
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
/ / ENTER/MENU
4
Press or to select the date, then press .
CH
TIMER REC SET
DATE
START
END
CH
SPEED
23(THU)
8:30AM
— — : — —
012
SP
/ / / / MENU
5
Set the start time, end time, channel and tape speed as in step 4, then press ENTER.
6
NOTES:
•
•
Press correction.
to move arrow backward for
To record from external source set the channel to "L1" or "L2". "L1" or "L2" will appear next to CH 125 (or 69).
To enter other programs, repeat step
3~5.
CH
TIMER REC SET
DATE
START
END
CH
23(THU)
125
7 : 00PM
9 : 30PM
SPEED SLP
/ / / / ENTER/MENU
2 3 T H
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
7 : 0 0PM
– : – –
– : – –
– : – –
– : – –
– : – –
– : – –
– : – –
9 : 3 0PM 1 2 5
– : – –
SLP
– – – –
– : – –
– : – –
– – – –
– – – –
– : – –
– : – –
– : – –
– : – –
– – – –
– – – –
– – – –
– – – –
/ / ENTER/CANCEL/MENU
• To return to the normal screen, press TV MENU twice.
7
Press TIMER REC. The T.REC indicator will light and the
VCR stands by for recording.
The timer recording will start at 5 seconds before the time you predetermined.
NOTES:
• If the T.REC indicator does not light in spite of the pressing of
TIMER REC, the cassette may not have been loaded yet (see
• page 34).
If the cassette is ejected in spite of the pressing of TIMER REC, the erase prevention tab of the cassette may have been removed (see page 34).
41
5L00101AE(40-42) 41 2/25/04, 3:09 PM
Timer recording
Timer recording special case
Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous page. At picture 4 press repeatedly until the desired setting appears. Then press ENTER.
When you press repeatedly, the indicator at DATE will change as follows, in this case the day is Friday.
The current day (Friday) SUN-SAT (Sunday to Saturday)
One month later minus one day
WKL-WED
(Weekly Wednesday)
MON-SAT (Monday to Saturday)
MON-FRI (Monday to Friday)
WKL-THU (Weekly Thursday)
In case Timer programs-overlap
• Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.
To cancel a program
Press or to select
“TIMER REC SET” in the option, then press .
Press or to select the unnecessary program, and press CANCEL to cancel the program.
(continued)
To comfirm the settings
Press PROGRAM once. The TV screen displays the timer program list. Press PROGRAM again. The TV screen displays the ON/OFF TIMER setting.
(once) (twice)
2 3 T H 7 : 0 0PM 9 : 3 0PM 0 0 7 SLP
— : — — — — — —
— : — — — — — —
— : — — — — — —
— : — — — — — —
— : — — — — — —
— : — — — — — —
— : — — — — — —
/ / ENTER/CANCEL/MENU
ON TIMER
12 : 00AM
CH 001
SUN-SAT
OFF TIMER
12 : 00AM
/ / / MENU
CH
CANCEL
CANCEL
Press PROGRAM 3 times. The screen returns to the normal screen.
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
— — — — — — : — — — — — —
/ / ENTER/MENU
Program 1
Program 2
Program 3
Recording
Control Settings
8 : 00 9 : 00 10 : 00 11 : 00
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2
Prog.3
NOTES:
• If there are other timer record programs remaining,
TIMER REC must be pressed to reactivate the timer, otherwise the remaining timer record programs will be ignored.
• You can correct or cancel a programmed setting in program confirm mode.
NOTES:
• The daily/weekly recording can be made continu-
• ously until the recording is canceled or the tape reaches the end.
During timer recording the automatic rewinding mechanism does not function.
42
5L00101AE(40-42) 42 2/25/04, 3:09 PM
advertisement
Related manuals
advertisement