advertisement
W1742W, W1742SW, W1754W, W1754SW (Mfd. Since 05/16)
Electrical.Safety.Instructions
These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully.
If there are differences between your machine and what is shown in this section, call Technical Support at (360) 734-3482 for assistance BEFORE making any changes to the wiring on your machine. An updated wiring diagram may be available.
Note: Please gather the serial number and manufacture date of your machine before calling. This information can be found on the main machine label.
SHOCK.HAZARD.
Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!
QUALIFIED.ELECTRICIAN.
Due to the inherent hazards of electricity, only a qualified electrician should perform wiring tasks on this machine. If you are not a qualified electrician, get help from one before attempting any kind of wiring job.
WIRE.CONNECTIONS.
All connections must be tight to prevent wires from loosening during machine operation. Double-check all wires disconnected or connected during any wiring task to ensure tight connections.
WIRE/COMPONENT.DAMAGE..
Damaged wires or components increase the risk of serious personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components before completing the task.
MODIFICATIONS . Using aftermarket parts or modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including serious injury or fire.
MOTOR.WIRING.
The motor wiring shown in these diagrams is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.
CAPACITORS/INVERTERS.
Some capacitors and power inverters store an electrical charge for up to 10 minutes after being disconnected from the power source.
To reduce the risk of being shocked, wait at least this long before working on capacitors.
CIRCUIT.REQUIREMENTS.
You MUST follow the requirements at the beginning of this manual when connecting your machine to a power source.
EXPERIENCING.DIFFICULTIES.
If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at
(360) 734-3482.
The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.shopfox.biz.
BLACK
WHITE
GREEN
RED
WIRING DIAGRAM COLOR KEY
BLUE YELLOW
BROWN
GRAY
YELLOW
GREEN
PURPLE
ORANGE PINK
LIGHT
BLUE
BLUE
WHITE
TUR-
QUOISE
-47-
advertisement