ST7LITEUS2, ST7LITEUS5 Device configuration and ordering information
Table 80.
Development tool order codes for the ST7LITEUSx family
In-circuit Debugger, RLink series
(1)
Emulator
Supported products Starter kit without demo board
Starter kit with
Demo Board
Programming tool
DVP series EMU series
In-circuit programmer
ST socket boards and
EPBs
ST7FLITEUS2
ST7FLITEUS5
STX-RLINK
(2)
STFLITE-
SK/RAIS
(2)
ST7MDT10-
DVP3
(3)
ST7MDT10-
EMU3
STX-RLINK
ST7-
STICK
(5)(4)
ST7SB10-
SU0
(5)
1.
Available from ST or from Raisonance, www.raisonance.com.
2.
USB connection to PC.
3.
Includes connection kit for Plastic DIP16/SO16 only. See “How to order an EMU or DVP” in ST product and tool selection guide for connection kit ordering information.
4.
Parallel port connection to PC.
5.
Add suffix /EU, /UK or /US for the power supply for your region.
14.4 ST7 application notes
Table 81.
ST7 application notes
Identification Description
Application examples
AN1658
AN1720
AN1755
AN1756
AN1812
Example drivers
Serial numbering implementation
Managing the readout protection in flash microcontrollers
A high resolution/precision thermometer using ST7 and NE555
Choosing a DALI Implementation strategy with ST7DALI
A high precision, low cost, single supply ADC for positive and negative input voltages
AN 969
AN 970
AN 971
SCI communication between ST7 and PC
SPI communication between ST7 and EEPROM
I²C communication between ST7 and M24Cxx EEPROM
AN 972 ST7 software SPI master communication
AN 973
AN 974
SCI software communication with a PC using ST72251 16-bit timer
Obsolete Product(s) - Obsolete Product(s)
AN 976
AN 979
Driving a buzzer through ST7 timer PWM function Obsolete Product(s) - Obsolete Product(s)
AN 980 ST7 keypad decoding techniques, implementing wakeup on keystroke
AN1017
AN1041
AN1042
Using the ST7 universal serial bus microcontroller
Using ST7 PWM signal to generate analog output (sinusoïd)
ST7 routine for I²C slave mode management
129/136
Device configuration and ordering information ST7LITEUS2, ST7LITEUS5
AN1321
AN1325
AN1445
AN1475
AN1504
AN1602
AN1633
AN1712
AN1713
AN1753
AN1947
AN1083
AN1105
AN1129
AN1130
AN1148
AN1149
AN1180
AN1276
AN1044
AN1045
AN1046
AN1047
AN1048
AN1078
AN1082
Table 81.
ST7 application notes (continued)
Identification Description
Multiple interrupt sources management for ST7 MCUs
ST7 S/W implementation of I²C bus master
UART emulation software
Managing reception errors with the ST7 SCI peripherals
ST7 software LCD driver
PWM duty cycle switch implementing true 0% & 100% duty cycle
Description of the ST72141 motor control peripherals registers
ST72141 BLDC motor control software and flowchart example
ST7 pCAN peripheral driver
PWM management for BLDC motor drives using the ST72141
An introduction to sensorless brushless DC motor drive applications with the ST72141
Using the ST7263 for designing a USB mouse
Handling Suspend mode on a USB mouse
Using the ST7263 Kit to implement a USB game pad
BLDC motor start routine for the ST72141 microcontroller
Using the ST72141 motor control MCU in sensor mode
Using the ST7 USB low-speed firmware V4.x
Emulated 16-bit slave SPI
Developing an ST7265X mass storage application
Starting a PWM signal directly at high level using the ST7 16-bit timer
16-bit timing operations using ST7262 or ST7263B ST7 USB MCUs
Device firmware upgrade (DFU) implementation in ST7 non-USB applications
Generating a high resolution sinewave using ST7 PWMART
SMBus slave driver for ST7 I2C peripherals
Software UART using 12-bit ART
ST7MC PMAC sine wave motor control software library
General purpose
Low cost power supply for home appliances
AN1526
AN1709
ST7FLITE0 quick reference note
Obsolete Product(s) - Obsolete Product(s)
AN1752 ST72324 quick reference note
Product evaluation
AN 910
AN 990
Performance benchmarking
ST7 benefits vs industry standard
130/136
ST7LITEUS2, ST7LITEUS5 Device configuration and ordering information
Table 81.
ST7 application notes (continued)
Identification Description
AN1077
AN1086
AN1103
AN1150
AN1151
AN1278
Product migration
Overview of enhanced CAN controllers for ST7 and ST9 MCUs
U435 can-do solutions for car multiplexing
Improved B-EMF detection for low speed, low voltage with ST72141
Benchmark ST72 vs PC16
Performance comparison between ST72254 & PC16F876
LIN (local interconnect network) solutions
AN1131
AN1322
AN1365
AN1604
AN2200
Migrating applications from ST72511/311/214/124 to ST72521/321/324
Migrating an application from ST7263 Rev.B to ST7263B
Guidelines for migrating ST72C254 applications to ST72F264
How to use ST7MDT1-TRAIN with ST72F264
Guidelines for migrating ST7LITE1x applications to ST7FLITE1xB
Product optimization
AN 982
AN1014
AN1015
AN1040
AN1070
AN1181
AN1324
AN1502
AN1529
AN1530
AN1605
AN1636
AN1828
Using ST7 with ceramic resonator
How to Minimize the ST7 power consumption
Software techniques for improving microcontroller EMC performance
Monitoring the Vbus signal for USB Self-powered devices
ST7 checksum self-checking capability
Electrostatic Discharge sensitive measurement
Calibrating the RC oscillator of the ST7FLITE0 MCU using the mains
Emulated data EEPROM with ST7 HDFLASH memory
Extending the current & voltage capability on the ST7265 VDDF supply
Accurate timebase for low-cost ST7 applications with internal RC oscillator
Using an active RC to wakeup the ST7LITE0 from power saving mode
Understanding and minimizing ADC conversion errors
PIR (passive Infrared) detector using the ST7FLITE05/09/SUPERLITE
AN1946
AN1953
Sensorless BLDC motor control and BEMF sampling methods with ST7MC
Obsolete Product(s) - Obsolete Product(s)
ST7LITE0 microcontrolled ballast AN1971 Obsolete Product(s) - Obsolete Product(s)
Programming and tools
AN 978 ST7 Visual Develop software key debugging features
AN 983
AN 985
Key features of the Cosmic ST7 C-compiler package
Executing code In ST7 RAM
AN 986 Using the indirect addressing mode with ST7
131/136
Device configuration and ordering information ST7LITEUS2, ST7LITEUS5
AN1477
AN1527
AN1575
AN1576
AN1577
AN1601
AN1603
AN1635
AN 987
AN 988
AN1039
AN1071
AN1106
AN1179
AN1446
AN1754
AN1796
AN1900
AN1904
AN1905
Table 81.
ST7 application notes (continued)
Identification Description
ST7 serial test controller programming
Starting with ST7 assembly tool chain
ST7 math utility routines
Half duplex USB-to-serial bridge using the ST72611 USB microcontroller
Translating assembly code from HC05 to ST7
Programming ST7 Flash microcontrollers in remote ISP mode (In-situ programming)
Using the ST72521 emulator to debug an ST72324 target application
Emulated data EEPROM with Xflash memory
Developing a USB smartcard reader with ST7SCR
On-board programming methods for XFLASH and HDFLASH ST7 MCUs
In-application programming (IAP) drivers for ST7 HDFLASH or XFLASH MCUs
Device firmware upgrade (DFU) implementation for ST7 USB applications
Software implementation for ST7DALI-EVAL
Using the ST7 USB device firmware upgrade development kit (DFU-DK)
ST7 customer ROM code release information
Data logging program for testing ST7 applications via I
2
C
Field updates for FLASH based ST7 applications using a PC comm port
Hardware implementation for ST7DALI-EVAL
ST7MC three-phase AC induction motor control software library
ST7MC three-phase BLDC motor control software library
System optimization
AN1711
AN1827
AN2009
AN2030
Software techniques for compensating ST7 ADC errors
Implementation of SIGMA-DELTA ADC with ST7FLITE05/09
PWM Management for 3-phase BLDC motor drives using the ST7FMC
Back EMF detection during PWM on time by ST7MC
Obsolete Product(s) - Obsolete Product(s)
132/136
