PLC setting. Beijer Electronics NA-9379
Add to My manuals35 Pages
Beijer Electronics NA-9379, a programmable I/O (PIO) device, offers a versatile solution for building custom control systems tailored to your specific needs. This compact and powerful module enables you to combine CODESYS control with the flexibility to design I/O signal configurations that precisely match your application requirements. Get ready to experience the benefits of a scalable and reliable control system with the NA-9379.
advertisement
![PLC setting. Beijer Electronics NA-9379 | Manualzz PLC setting. Beijer Electronics NA-9379 | Manualzz](http://s2.manualzz.com/store/data/066718013_1-2c3d3ee95bd81983e25c0be1e06b7fe3-360x466.png)
Programmable I/O (PIO) NA-9379, Basic setting
KI00341 2014-10
8.5
PLC setting
• Interval time for the application (default value 20 ms)
Update the I/O, set the Bus cycle task and Output handle at stop.
• Double click at “Device (NA9379)” and select “PLC setting” and set like picture.
Note!
When test of I/O (hardware wiring) with an empty program or the PIO in STOP, set like picture.
In STOP mode, the digital outputs go to OFF state, even if they are set to ON as default setting. www.beijer.se
14 (35)
advertisement
Related manuals
advertisement
Table of contents
- 1 Function and area of use
- 1 About this Start Up document
- 2 First step!
- 3 Table of Contents
- 4 Specification
- 4 Interface, PIO (NA-9379)
- 5 LED Indicator
- 7 Setup IP address in PIO
- 7 IP setting (default)
- 7 Set the IP with BootP server
- 9 Configuration of CODESYS
- 9 Add PIO (NA-9379) to CODESYS
- 11 Configuration of PIO in CODESYS
- 11 Programming and configuration
- 12 How to add a POU
- 13 How to add a Task
- 13 How to add a POU to a Task
- 14 PLC setting
- 15 Select I/O module
- 16 Setting Device Parameter and I/O Mapping
- 17 Program example
- 17 New project
- 17 Add Global Variable and Persistent Variables
- 19 I/O Mapping
- 20 Write program in “PLC_PRG
- 21 Transfer CODESYS project to PIO
- 23 Monitor
- 24 Project backup
- 24 CODESYS, Create backup files
- 24 CODESYS, Project Archive
- 25 Persistent variables (32 kbyte)
- 26 Appendix
- 26 Environment specification
- 27 Interface Specification
- 29 Wiring diagram, PIO
- 31 Dimension
- 31 Expansion
- 31 Inserting and Removing the Module
- 32 Removable Terminal Block (RTB)
- 32 Method of Wiring
- 32 Program Memory
- 32 Boot application
- 33 Check Compiler, PIO and Library version
- 34 Trouble Shooting