Project backup. Beijer Electronics NA-9379
Add to My manuals35 Pages
Beijer Electronics NA-9379, a programmable I/O (PIO) device, offers a versatile solution for building custom control systems tailored to your specific needs. This compact and powerful module enables you to combine CODESYS control with the flexibility to design I/O signal configurations that precisely match your application requirements. Get ready to experience the benefits of a scalable and reliable control system with the NA-9379.
advertisement
Programmable I/O (PIO) NA-9379, Basic setting
KI00341 2014-10
10 Project backup
10.1
CODESYS, Create backup files
If this option is activated, at each saving the project will not only be saved in <projectname>.project but also copied to a file <projectname>.backup.
If needed you can rename this backup-file and re-open in CODESYS.
Menu \Tools\Options
10.2
CODESYS, Project Archive
The best way to get all components from a CODESYS project is to make a ‘ Save/Send Archive ’.
That will save and pack all files referenced by and used within the currently opened project in to one archive file. The archive file can either be stored or sent as attachment of an email.
The archive file can easily be unpacked by use of ‘ Extract Archive ’
Note!
The archive function is not intended for restoring a project environment.
It is designed for an easy packing of all files belonging to a project! www.beijer.se
24 (35)
advertisement
Related manuals
advertisement
Table of contents
- 1 Function and area of use
- 1 About this Start Up document
- 2 First step!
- 3 Table of Contents
- 4 Specification
- 4 Interface, PIO (NA-9379)
- 5 LED Indicator
- 7 Setup IP address in PIO
- 7 IP setting (default)
- 7 Set the IP with BootP server
- 9 Configuration of CODESYS
- 9 Add PIO (NA-9379) to CODESYS
- 11 Configuration of PIO in CODESYS
- 11 Programming and configuration
- 12 How to add a POU
- 13 How to add a Task
- 13 How to add a POU to a Task
- 14 PLC setting
- 15 Select I/O module
- 16 Setting Device Parameter and I/O Mapping
- 17 Program example
- 17 New project
- 17 Add Global Variable and Persistent Variables
- 19 I/O Mapping
- 20 Write program in “PLC_PRG
- 21 Transfer CODESYS project to PIO
- 23 Monitor
- 24 Project backup
- 24 CODESYS, Create backup files
- 24 CODESYS, Project Archive
- 25 Persistent variables (32 kbyte)
- 26 Appendix
- 26 Environment specification
- 27 Interface Specification
- 29 Wiring diagram, PIO
- 31 Dimension
- 31 Expansion
- 31 Inserting and Removing the Module
- 32 Removable Terminal Block (RTB)
- 32 Method of Wiring
- 32 Program Memory
- 32 Boot application
- 33 Check Compiler, PIO and Library version
- 34 Trouble Shooting