Cleaning. GAI-Tronics VoIP Titan Illuminated Crossing Telephone (1193 ), Illuminated Crossing Phone VoIP Titan

9. Cleaning

Recommended cleaning methods are outlined below:

9.1. Normal Cleaning

For normal cleaning we recommend "Virosol", manufactured by Clover products.

Carefully follow manufacturer's instructions for storage, handling and use.

9.2. Stainless Steel Push-buttons

Stainless steel push-button should be cleaned regularly especially if the telephone is in a marine environment. The stainless steel may show signs of discolouration or rust

– this will not damage the button or impair its performance but may look unsightly and can be cleaned off using normal cleaning agents as above. In extreme cases a mild abrasive may be necessary.

9.3. Graffiti

For graffiti, paint and ink we recommend the use of 3M GR2 graffiti stain remover.

CAUTION: This is a very aggressive chemical. Pay close attention to the manufacturer's recommendations for storage, handling and use.

10. Aftercare

The purchase of your GAI-Tronics product does not end our commitment to you.

In addition to our warranty obligations, GAI-Tronics are able to offer various levels of maintenance packages, installation and commissioning packages and technical support, from ad-hoc repairs to full maintenance contracts.

By choosing GAI-Tronics as your aftercare provider you are ensured of manufacturer expertise and ISO 9001-certified quality control standards throughout the life of the product.

We can also supply a full range of accessories including mounting posts, beacons and high-volume sounders.

Contact GAI-Tronics for details. https://www.hubbell.com/gai-tronics/en/

VoIP Titan Illuminated Crossing Telephone. 17