Technical Specifications. GAI-Tronics VoIP Titan Illuminated Crossing Telephone (1193 ), Illuminated Crossing Phone VoIP Titan

11. Technical Specifications

Product features

Power supply Power-over-Ethernet, 802.3af compliant (Class 0) via RJ45, both method A and method B, or

External power supply: 24-48Vdc, 200mA.

Maximum voltage range: 22-50V

Hookswitch Electronic with no external moving parts

Ringer loudness 80dBA @ 1m

Handset

Suitable for inductive coupling to Hearing Aids having a `T' switch position.

Network

Tested to ETS 300-381

10/100 BaseT Ethernet RJ45, Cat5 or Cat5e UTP

Static IP provisioning or DHCP

Call Control

Signalling

External inputs

SIP (RFC3261 compliant)

Loose routing

4 auxilliary inputs, volt free, (internal pull-up resistor source current = 300uA)

External outputs Ratings:

Output 1 - 2A at 250Vac, 2A at 30Vdc

Output 2 - 3A at 250Vac, 1A at 24Vdc

REFER TO SAFETY INFORMATION IN SECTION 7.2

(Note: for Output 1, a continuous current of 2A will cause a

22°C temperature rise to the PCB area close to the terminals after 10mins. If the current is below 1A this temperature rise will be less than 5°C. Output 2 will not give any significant temperature rise up to its rated current of 3A)

Codecs & Audio G.711 A-Law

G.711 µ-Law

G.729

Codec preference sequence

Configurable ring and call progress tones (to emulate national tones)

Configuration Embedded web server

SNMP

Configuration file download

SNTP with timezone and daylight saving

Automatic updating via TFTP

Password protection

18 VoIP Titan Illuminated Crossing Telephone.

Product features

Monitoring and

Reporting

Call Diversion

SNMP

Automatic fault reporting

Handset integrity monitoring

Configurable call lists (max 30 entries)

Numbers or URIs

Divert to next in list if the call fails

Environmental limits

Temperature: Operating: -40°C to +60°C (-40°F to 140°F)

Storage: -40°C to +70°C (-40°F to 158°F)

Relative Humidity Up to 95% (non-condensing)

Ingress To EN60529:1992

– Degrees of protection provided by

Protection enclosures:

Titan with door closed IP66 (IP65 with door open)

Physical characteristics

Casing material Aluminium

Handset Material Cycoloy (2800) with stainless steel or polyester curled cord.

Weight

Dimensions

5kg (11lbs).

189W x 366H x 130D mm

VoIP Titan Illuminated Crossing Telephone. 19

Compliance to standards

EMC EN 55032 - Electromagnetic compatibility of multimedia equipment -

Emission requirements

EN 55035 - Electromagnetic compatibility of multimedia equipment -

Immunity requirements

EN 50121-4 - Railway applications, emission and immunity

Federal Communications Commission Statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Safety

ICES-003 Class A

EN 60950-22 Information technology equipment. Safety. Equipment installed outdoors

EN 62368-1 Audio/video, information and communication technology equipment. Safety requirements

European

Directives

2014/30/EU

– EMC Directive

2014/35/EU – Low Volltage Directive (LVD)

2011/65/EC - Restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) (RoHS 2) Directive

2012/19/EU - Waste Electrical and Electronic Equipment (WEEE)

Directive

20 VoIP Titan Illuminated Crossing Telephone.