Adding Multiple Printers to the Xerox Easy Assist App. Xerox VersaLink C400

Getting Started

When the initial setup is complete, with the Xerox Easy Assist app, you can perform the following:

• Setting up a new printer

• Checking the printer status and order supplies

• Downloading Print and Scan Drivers

• Printing

• Getting troubleshooting support

• Removing a printer from the XEA app My Printers list

For Xerox Easy Assist app features, refer to

Xerox ® Easy Assist (XEA) App .

A D D I N G M U LT I P L E P R I N T E R S TO T H E X E RO X E A S Y A S S I S T A P P

If your printer is already set up on your network and the Initial Setup Wizard is complete, through the XEA app, you can include additional printers directly to the list of My Printers. To add printers that are on the network, open the

XEA app Home page. On the My Printers screen, touch the ++ icon, then refer to the following options: device.

– Q Cooddee

– IIPP A

Type the IP Address of the printer, then touch O

Finding the IP Address of Your

Printer

.

the network:

– If the app finds the printer, you can select and add the printer directly.

– If the app is unable to find the printer you are looking for, then you can add the printer by typing its IP address.

Note: If the printer and mobile device cannot communicate, ensure that they are on the same network.

48 Xerox ® VersaLink ® C400 Color Printer User Guide