Built-in CD Player. Pioneer deh-p900hdd

23

Built-in CD Player

D

isplay and indicators

FORM 1

FORM 2

q q e w r r w e q

Source name w

Track number e

Disc title r

Play time t

Track title t

B

asic operation

The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing an 8 cm CD.

1. Press OPEN to open the front panel.

2. Insert a CD into the CD loading slot.

CD loading slot

4. Press VOLUME to extend the VOLUME outward.

• When you press VOLUME, it extends outward so that it becomes easier to turn. To retract VOLUME, press it again.

5. Turn VOLUME to adjust the volume.

6. Press

2

or

3

to select a track.

Pressing

3 skips to the start of the next track.

Pressing

2 once skips to the start of the current track. Pressing again will skip to the previous track.

• If you press and hold

2 or

3

, you can perform fast forward or reverse.

7. Press OPEN and then press CD EJECT to eject the CD.

• Be sure to close the front panel after removing the CD.

WARNING:

• Do not use with the front panel left open. If the front panel is left open, it may result in injury in the event of an accident.

Note:

• You can select CD as the source by pressing

SOURCE when a disc is loaded in this product.

• When the front panel is open, multi-function buttons are not available.

• Do not insert anything other than a CD into the CD loading slot.

• A CD left partially inserted after ejection may incur damage or fall out.

• If a CD cannot be inserted fully or playback fails, make sure the recorded side is down. Press the CD

EJECT and check the disc for damage before reinserting it.

• If the built-in CD player cannot operate properly, an error message (such as “ERROR-12”) appears on the display. Refer to “Understanding built-in CD player error messages” on page 78.

3. Close the front panel.

CD EJECT button