Changing band. Pioneer deh-p900hdd

Recalling broadcast stations

1. Press NEXT to display “1” – “6” (or “7” –

“12”.

Press NEXT until “1” – “6” (or “7” – “12”) appears.

2. Press any of the buttons 1 – 6 (or 7 – 12) to recall the station preset under that button.

Note:

• You can also use

5 or ∞ to recall broadcast stations memorized under the buttons 1 – 12.

C

hanging band

• Press BAND to select the desired band.

Press BAND repeatedly to switch between the following bands:

TV 1

=

TV 2

T

V tuner function menu

The TV tuner function menu has the following functions:

S

electing channels from the preset channel list

The preset channel list lets you see the list of preset channels and select one of them to receive.

1. Press FUNC and then press chLIST to select the preset channel list mode.

2. Press NEXT to switch between “1” – “6” and “7” – “12”.

3. Press any of the buttons 1 – 6 (7 – 12) to recall the desired channel.

Note:

• You can also use

2, 3 and 5 to select and recall the desired channel.

q w

q BSSM (best stations sequential memory)

Press BSSM repeatedly to turn BSSM on or off.

When finished, the display switches to the preset channel list mode.

w chLIST (preset channel list)

For operation of the preset channel list, refer to “Selecting channels from the preset channel list” on this page.

Note:

• If you do not operate the function within about 30 seconds, the display is automatically returned.

58