Multi-CD Player. Pioneer deh-p900hdd

47

Multi-CD Player

D

isplay and indicators

FORM 1

FORM 2

q q r w e w t t e r q

Source name w

Disc number e

Track number r

Disc title t

Play time y

Track title y

50

-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players.

B

asic operation

This product can control a multi-CD player, which is sold separately.

1. Press SOURCE to select the multi-CD player.

Press SOURCE until “Multi-CD” appears.

2. Press VOLUME to extend the VOLUME outward.

• When you press VOLUME, it extends outward so that it becomes easier to turn. To retract VOLUME, press it again.

3. Turn VOLUME to adjust the volume.

4. Press

5

or

∞

to select a disc.

A disc number for which there is no disc will be skipped.

• You can use the buttons 1 – 6 (or 7 – 12) to select a disc directly.

5. Press

2

or

3

to select a track.

Pressing

3 skips to the start of the next track.

Pressing

2 once skips to the start of the current track. Pressing again will skip to the previous track.

• If you press and hold

2 or

3

, you can perform fast forward or reverse.

Note:

• When the multi-CD player is performing the preparatory operations, “Ready” is displayed.

• If the multi-CD player cannot operate properly, an error message such as “ERROR-12” is displayed.

Refer to the multi-CD player owner’s manual.

• If there are no discs in the multi-CD player magazine, “No disc” is displayed.

S

electing a disc directly

You can use the buttons 1 – 6 (or 7 – 12) to select a disc directly.

1. Press NEXT to display “1” – “6” (or “7” –

“12”).

Press NEXT until “1” – “6” (or “7” – “12”) appears.

2. Press any of the buttons 1 – 6 (or 7 – 12) to select a disc located at 1 to 6 (or 7 to

12).

Note:

• You cannot display “7” – “12” when a 6-disc multi-

CD player is connected.