![](http://s1.manualzz.com/store/data/004229910_1-492389d67a924fc062aee9373cef609b-128x128.png)
advertisement
![Operating and Installation Manual | Manualzz Operating and Installation Manual | Manualzz](http://s1.manualzz.com/store/data/004229910_1-492389d67a924fc062aee9373cef609b-360x466.png)
PERFECT 2020
Time recorder
Manual for the operation and installation of the time recorder.
Copyright © ISGUS J. Schlenker-Grusen GmbH 2001 - 2007
The company ISGUS J. Schlenker-Grusen GmbH claims copyright protection for this documentation. No part of this documentation may be amended, extended, reproduced or by any means of infringement on other legitimate interests without the prior written permission of ISGUS.
With the exception of component parts changes, ISGUS has made every effort to keep the contents of this manual current and correct at the time of publication.
However, we cannot guarantee the documentation to be 100% accurate.
Should you find any errors in this document, please let us know.
We are always grateful for suggestions and comments from our customers.
Edition 007CA. 0207 00 BA 4O
Printed in Federal Republic of Germany
Ref. No. 7140
ISGUS
J. Schlenker-Grusen GmbH
Oberdorfstraße 18 - 22
DE - 78 054 Villingen-Schwenningen
LISTED
I.T.E.
1DD8
WARNING
This Equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Only peripherals certified to comply with the Class B limits may be attached to this equipment.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
advertisement
Related manuals
advertisement
Table of contents
- 1 PERFECT 2020
- 3 Impressum
- 5 Safety instructions
- 7 Table of Contents
- 8 Product Overview
- 9 Time Recorder Specifications
- 10 Contents
- 11 Selecting a Location
- 11 General Conditions
- 11 Specific Conditions for the Time Recorder
- 12 Time Recorder Installation
- 12 Installation for Table Operation
- 13 Wall Mounting
- 14 Open the Recorder
- 15 Close the Recorder
- 15 Remove the Metal Back Plate
- 16 Wall Mounting
- 16 Connect the Power Supply
- 18 Connect Optional Features
- 20 Getting Started
- 20 Switch on the Unit
- 21 Programming Panel
- 24 Setting the Time and Date
- 26 Showing or Setting the Time of the Internal Quartz Clock
- 27 Synchronizing the Analogue Clock
- 27 Setting the Date
- 28 Programming
- 28 Calling up the Programming Routine
- 29 Daylight Saving Time Change-over
- 31 Column Change Timing
- 33 Card Lift / Line Change timing
- 34 Ribbon Color Change
- 36 Signal Operation
- 38 Signal out-programming
- 39 Check of individuals (Option)
- 40 Punching at the Recorder
- 41 Punching with Standard Time Cards
- 41 Standby Operation (Option)
- 42 Change of Fuse for Signal Output
- 43 Error messages
- 44 Adjustment Routine
- 44 Card lift / Line change
- 44 Column change
- 45 Changing the Ribbon
- 46 Cleaning the Time Recorder
- 47 Technical Specifications
- 48 Local Sales and Service Dealer