Logging into the iRMC web interface
7.1
Logging into the iRMC web interface
Ê Open a web browser on the remote workstation and enter the (configured)
DNS name (see page 264 ) or IP address of the iRMC.
Different login screens appear depending on whether LDAP access to a directory service has been configured for the iRMC (LDAP Enabled option, see
page 295
):
I
If no login screen appears, check the LAN connection (see
section
"Testing the LAN interface" on page 47
).
– LDAP access to the directory service is not configured for the iRMC
(LDAP Enabled option is not activated) and Always use SSL Login option
(see
page 295
) is not activated:
122
Figure 54: Login screen for the iRMC web interface (LDAP access not configured and the “Always use SSL login” option is not selected)
Ê
Type in the data for the default administrator account.
User name
: admin
Password
: admin
I
Both the User name and the Password are case-sensitive.
For reasons of security, it is recommended that you create a new administrator account once you have logged in, and then delete the default administrator account or at least change the password for the account (see
"User “<name>” Configuration
- User configuration (details)" on page 283 ).
Ê
Click OK to confirm your entries.
iRMC
Logging into the iRMC web interface
– LDAP access to the directory service is configured for the iRMC
(LDAP Enabled option is activated) or Always use SSL Login option is activated):
Figure 55: Login screen for the iRMC web interface (LDAP access configured)
I
The user name and password are always SSL-protected when they are transmitted. If you activate the Secure (SSL) option, all communication between the web browser and the iRMC is carried out over HTTPS.
Ê Type in the data for the default administrator account.
User name
: admin
Password
: admin
I
For reasons of security, it is recommended that you create a new administrator account once you have logged in, and then delete the default administrator account or at least change the
password for the account (see "User “<name>” Configuration
- User configuration (details)" on page 283
).
Ê Click Login to confirm your entries.
The web interface opens showing the System Information page (see
page 133 ).
iRMC S4
123
