IPMI OEM Commands supported by the iRMC
12.1.2.4 SCCI-compliant signaling command
10 02 - Write to System Display
This command is used to write characters to the LocalView display (if connected).
Request Data
Response Data
-
-
1:3
4
B8 NetFnlLUN: OEM/Group
10 Cmd : Command Group Fan Test
80 28 00 IANA-Enterprise-Number FTS, LS byte first
02 Command Specifier
5
6:7
8
9
Object Index: : Line on Display to write on.
Value ID (not used)
Length Number of characters to write, incremented by one. (The string need not be null-terminated; characters exceeding the length of a display line are truncated.)
Attribute:
0 = Write String left aligned.
1 = Write String centered.
10:10+n Characters to write to the display; string need not be nullterminated.
-
BC
-
1
2:4
10
Completion Code
80 28 00 IANA-Enterprise-Number FTS, LS byte first iRMC S4
435
