Console Redirection (EMS/SAC)
8.13
Console Redirection (EMS/SAC) -
Start text console redirection
You can start console redirection with the Console Redirection (EMS/SAC) item from the main menu.
I
Text-based console redirection only works over the LAN with Serial 1.
If console redirection is also to be used while the operating system is running, the Serial 1 Multiplexer must be set to System.
I
Use the keyboard shortcut "<ESC>(" or "~." (tilde dot) to exit the text console.
It is possible that only one of these options will work, depending on the type of PRIMERGY server used.
8.14
Start a Command Line shell... -
Start a SMASH CLP shell
Start a Command Line shell...
in the main menu allows you to start a SMASH CLP shell. SMASH CLP stands for “Systems Management Architecture for Server
Hardware Command Line Protocol”. This protocol permits a Telnet- or SSHbased connection between the management station and the managed server.
For further details on SMASH CLP, please refer to section "Command Line
Protocol (CLP)" on page 383
.
When you select (s) Start a Command Line shell... from the main menu, the following window appears:
Figure 245: Remote Manager: Start a SMASH CLP shell... menu
Ê Choose (1) Start a SMASH CLP shell... to start the SMASH CLP shell.
380
iRMC
