Virtual Media
7.17.1 Virtual Media Options - Configuring virtual media options
The Virtual Media Options page allows you to configure the options for the virtual media provided via the iRMC.
Figure 217: Virtual Media Options page
USB Attach Mode
Attach mode of the virtual media.
The following modes are offered for selection:
Always Attach
The virtual media is always attached to the server.
Auto Attach
The virtual media is attached to the server only when a virtual media session is started.
Number of Floppy Devices
Maximum number of Floppy devices that may be used in a Virtual Media session. 0 to 4 Floppy devices can be configured. Default: 0.
Number of CD/DVD Devices
Maximum number of CD/DVD devices that may be used in a Virtual
Media session. 0 to 4 four CD/DVD devices can be configured. Default: 2.
iRMC S4
333
Virtual Media
Number of Harddisk Devices
Maximum number of hard disk devices that may be used in a Virtual
Media session. 0 to 4 four hard disk devices can be configured.
Default: 1.
Enable Remote Image Mount
Enables / disables the Remote Image Mount, which makes it possible to host CD/DVD, Floppy, and hard disk ISO images on a server in the network.
Activating the Enable Remote Image Mount option displays the additional
Remote Image Mount
link under Virtual Media in the navigation area.
Clicking the Remote Image Mount link opens the Remote Image Mount page which contains the panels for configuring the Image Options of the corresponding image type (see
page 335
).
Ê Click Apply to activate your settings.
334
iRMC
