Configuring via Server Configuration Manager
9.1
Calling the Server Configuration Manager from the ServerView Installation Manager
You can call the Server Configuration Manager from the ServerView Installation
Manager (Installation Manager for short). Configuration via the Installation
Manager is of significance when installing the server. The Installation Manager makes the Server Configuration Manager available both during preparation for installation and as a separate maintenance program. The Installation Manager is described in the manual “ServerView Installation Manager”.
9.2
Calling the Server Configuration Manager from the Windows Start menu
On Windows-based servers, you can also call the Server Configuration
Manager via the Windows Start menu.
To do this, proceed as follows:
Ê On the managed server, select:
Start – All Programs – Fujitsu – ServerView – Agents – Configuration Tools –
System Configuration.
The System Configuration window opens:
Figure 248: System Configuration window iRMC S4
389
Configuring via Server Configuration Manager
Ê Accept the preset values.
Ê Click OK.
The tab view of the System Configuration window opens.
You can scroll to the left and right through the tabs by clicking the arrows next to the tabs.
Applying settings
To apply the settings made in the individual tabs, proceed as follows for each tab:
Ê Click the Apply button.
Ê Click the Save Page button.
The iRMC automatically reboots to activate the changed settings.
390
iRMC
