Introduction. Lupus Electronics LUPUSEC-XT1

Introduction

Thank you for purchasing the LUPUSEC-XT1 wireless security system. Before you start the system, please take the time to read the following safety and installation information carefully and attentively. It is imperative to comply with these instructions in order to ensure the safe operation. If you have any further questions, please contact your local retailer or LUPUS-Electronics directly. Your LUPUSEC-XT1 was developed and built with state-of-the-art technology and complies with European and

German standards. Declarations of conformity are available on request or for download at www.lupus-electronics.de.

Please keep this manual safely to be able to answer possible questions in the future.

The manual is an integral part of the product even in case it is resold to a third party.

Disclaimer

All technical details and descriptions in this manual have been written with the greatest care. However, Lupus-Electronics cannot entirely exclude mistakes in this manual. Therefore, we do not assume any legal responsibility or liability, which is result of wrong information in this manual. Descriptions, technical images and technical data are subject to change according to technical progress without notice.

In addition, LUPUS-Electronics reserves the right to change this product and its manual without prior notice. We do not assume any guarantee with regard to the content of this document. We appreciate any comments on mistakes or inaccuracies, which may help us to improve this product and this manual.

This symbol is intended to attract the user’s attention to the potential risk of dangerous unprotected voltage inside the housing. This may lead to an electric shock.

This symbol is intended to attract the user‘s attention to use and maintenance instructions in the manual and documents enclosed to the product.

4

WARNING:

TO MINIMIZE THE RISK OF AN ELECTRIC SHOCK, YOU MUST NOT EXPOSE

THIS PRODUCT TO WET AND MOIST CONDITIONS AT ANY TIME.

All Lupus-Electronics products are lead-free and meet the requirements stated under the European Directive on the Restriction of Hazardous

Substances (RoHS). This guarantees that the entire production process and the product itself are free of lead and of all listed hazardous substances.

This product was tested and complies with the regularities for a class of digital devices stated under FCC part 15. These limits were specified to provide reasonable protection against harmful exposure when operating the device in a commercial environment. This product emits and uses radio energy. It may in addition interfere with other radio communication systems, if it is not installed or used according to this manual. Using the device in residential areas may cause disturbances to be possibly remedied at the user’s expense.

If installed properly according to this manual, the product complies with

CE regularities. To avoid the risk of electromagnetic interferences (e.g. with radios or radio traffic), it is highly recommended to use shielded cables only.

Conformity:

The declaration of conformity is available at:

LUPUS-Electronics GmbH

Otto-Hahn-Str. 12

D-76829 Landau

5